Pipsqueak Has Spoken !

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

User avatar
vixenmaster
Posts: 13108
Joined: Wed Sep 14, 2005 2:51 pm
Location: Land of Rocks, Ozarks Mo.

Pipsqueak Has Spoken !

Post by vixenmaster » Mon Oct 16, 2017 10:35 am

At 7:21 am a Doe came slippin thru the trees, had to wait abit before she got into an openin fer a shot. I shot her in the right shoulder abit high usin a 2219 n a Torrid SS 85 gr B-Head. The red luminok lit up on its way n shot looked good to me. It was 22 yds n i did hit couple inches higher than i had hoped fer, bein sighted in fer 25 yds. I heard the crash n kickin fer a few seconds n then quiet. I called my Mrs. told her tell my girls Dead Deer n let them out. I had gotten down n recovered my arrow but wid my eyes it was real hard to see the blood in that dim light. The girls showed up n 5-8 seconds they had the deer. Then because my old 3 wheeler is in the shop as it would not fire up about 2 weeks ago. So i came home got a rope n it took me a long time to drag her abit over a 1/4 mile. I got the shakes now n tryin to rest after that set to. Will make pic's n post abit later after i get her skint n bagged
https://postimg.org/image/ufzsptczh/]Image
Last edited by vixenmaster on Mon Oct 16, 2017 3:09 pm, edited 2 times in total.
crossbowcrossroads.com/forum/index
Marie Laveau Voodoo Queen Matrix 360 Captain Morgan Micro Nitemare 335
Pipsqueak Hybrid Micro/Matrix 135 lb 235 fps
Captain Jack Sparrow Custom Micro 355
vixenmasterstrings@yahoo.com 417-505-9315

User avatar
artifact
Posts: 123
Joined: Thu Nov 05, 2015 8:04 am
Location: NE PA.

Re: Pipsqueak Has Spoken !

Post by artifact » Mon Oct 16, 2017 11:14 am

Congrats on getting some venison Mike, I'm still working on it! Take care, and take your time if you need to drag, having the shakes after dragging tells me you need to slow down a bit, I know I sure have when it comes to dragging.

W.Miguire
Posts: 1021
Joined: Wed Jun 04, 2014 6:26 pm
Location: Washington Island Wisc.

Re: Pipsqueak Has Spoken !

Post by W.Miguire » Mon Oct 16, 2017 11:18 am

Way to go Mike, take care of your self don't over do it.
W.M.

mr meat
Posts: 3957
Joined: Mon Jan 05, 2009 4:40 pm
Location: Waterdown-- Ontario

Re: Pipsqueak Has Spoken !

Post by mr meat » Mon Oct 16, 2017 11:29 am

Congrats on the doe Mike
vixen 11
exoct 175 with Aging custom stock #27
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen

janesy
Posts: 659
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: Pipsqueak Has Spoken !

Post by janesy » Mon Oct 16, 2017 11:37 am

Congrats Mike!
Matrix 355 (sold :( )
Micro-Mod 360
Micro 315 fully jambed!
It so hard to choose... Just get one of everything.

User avatar
mikej
Posts: 5633
Joined: Sat Sep 15, 2007 12:38 pm
Location: ontario

Re: Pipsqueak Has Spoken !

Post by mikej » Mon Oct 16, 2017 12:03 pm

Congrats
If guns cause crime, all of mine are defective

User avatar
xcaliber
Posts: 8453
Joined: Fri Jan 11, 2013 7:35 pm
Location: NW Indiana

Re: Pipsqueak Has Spoken !

Post by xcaliber » Mon Oct 16, 2017 12:07 pm

I had a feeling today was going to produce for you Mike. Take it easy, and congrats!
Matrix 355 (Trixxi) Redfield Revenge 2.5 Trigger Tech
Matrix 330 (Xylia) Nikon Bolt XR Single Stage Trigger Tech
Kodabow Zulu Scout (Karma) MFO Tagged Out Sights.
Hoyt Spyder 34 (Black Magic)

User avatar
rossh
Posts: 18
Joined: Sun Sep 03, 2017 10:14 pm
Location: Ontario, Canada

Re: Pipsqueak Has Spoken !

Post by rossh » Mon Oct 16, 2017 12:15 pm

Congrats man , I've used a wagon when that close sometimes even a riding mower . Luck all
Slightly past my best before date .But still having fun . K.I.S.S . Made in Canada
Exocet 165#

User avatar
longbow joe
Posts: 1570
Joined: Sat Jun 06, 2015 8:55 pm
Location: south eastern pa (bucks county)

Re: Pipsqueak Has Spoken !

Post by longbow joe » Mon Oct 16, 2017 12:16 pm

Come on mike ......a picture of the deer in the wagon with the dogs or it didn't happen . Was it one of my 2219s?
Micro 335 camo crossbones /matrix 330 workhorse nikon bolt /vixen ll / striker offspring with a micro stock crossbones/ matrix 355 with a micro stock crossbones/ metal ibex (adopted manco morto)/ trigger tec's on most / spitfires/easton2216s/zombies

User avatar
Bcxbow
Posts: 91
Joined: Fri Jun 30, 2017 4:44 am
Location: North Georgia

Re: Pipsqueak Has Spoken !

Post by Bcxbow » Mon Oct 16, 2017 12:18 pm

Congrats Mike and like others have said, don’t over do it.
BD400
HHA Optimizer, Hawke XB1 SR
18" BEA ZS,
Spifires, Magnus Black Hornet
Strings by Boo, VM, nchunterkw

grouse
Posts: 187
Joined: Mon Oct 22, 2012 4:08 pm
Location: Missouri

Re: Pipsqueak Has Spoken !

Post by grouse » Mon Oct 16, 2017 12:27 pm

Dragging a deer is hard work but very satisfying! I expect killing a deer with a bow you made major modifications to is equally satisfying. Congratulations!
axiom
350 SE

User avatar
ihunt
Posts: 326
Joined: Mon Mar 21, 2016 9:30 am
Location: Montreal Canada

Re: Pipsqueak Has Spoken !

Post by ihunt » Mon Oct 16, 2017 1:42 pm

Congrats! :D
Micro Camo 335
Zombie Slayers

User avatar
catclr
Posts: 94
Joined: Thu Sep 01, 2016 7:37 am
Location: North of Harrisburg, Pa.

Re: Pipsqueak Has Spoken !

Post by catclr » Mon Oct 16, 2017 1:46 pm

Way to go on the doe.
Matrix 355
DM Quiver Mount
Hawke XB1
DrStirrup 4x4 Kocker w/AMSTEEL Rope
DrStirrup Foot Stirrup
DrStirrup Bumpers
nchunterkw, davesonic444 strings
X-ACT 100 gr.
TRAUMA 100 gr.
FIXpandable 100 gr.
SPYNAL TAPP Shafts
Nufletch Ignitor's

User avatar
Riflemanz
Posts: 2095
Joined: Thu Feb 04, 2010 8:12 am
Location: Wisconsin

Re: Pipsqueak Has Spoken !

Post by Riflemanz » Mon Oct 16, 2017 2:44 pm

Congrats! That's why I take younger hunting partners along with me!
Team Matrix 355
Matrix 355 The Crusher
TT 2 stage trigger
Executioner arrows
Easton XX75 magnums 2219
Xcaliber custom string
Boo Custom String
Vixenmaster Custom string
8ptbuk string
Rocket 3 blade 2" cut
Slick tricks
HSS Vest 30' lifeline

hankenhunter
Posts: 2698
Joined: Mon Jul 12, 2010 9:21 pm
Location: Thompson/Nicola, British Colombia

Re: Pipsqueak Has Spoken !

Post by hankenhunter » Mon Oct 16, 2017 3:22 pm

Congrats Mike. Love the expression on your face. It says," am I cool or what". Lol
2010 Equinox The "Beast"
Big John's Zombies with helical blazers
S-5 string stoppers
150 gr. boltcutters, 145 gr. Saunders blunts
Varizone scope
Vixen master string
DaGriz knife

Post Reply

Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], DMc, vixenmaster, Wisconsinbadger and 29 guests