micro limbs on a matrix

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
mingle
Posts: 78
Joined: Thu Jun 14, 2012 8:27 am
Location: SE michigan

micro limbs on a matrix

Post by mingle » Mon Nov 06, 2017 8:41 pm

Wiil micro limbs fit on a matrix

paulaboutform
Posts: 4425
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia

Re: micro limbs on a matrix

Post by paulaboutform » Mon Nov 06, 2017 9:37 pm

Even if they do, don't do it! They're too short to put on the longer rail and that's a great way to get hurt...potentially. Kinda like putting matrix limbs on the older Exo series rails.

Paul

shafferm
Posts: 271
Joined: Thu Jan 17, 2008 7:04 pm
Location: Mason, Michigan

Re: micro limbs on a matrix

Post by shafferm » Mon Nov 06, 2017 9:40 pm

Yes and no, the limbs will bolt into place on the riser. The largest power stroke Micro is on the Micro 355 which is 10 inches and is pulling 280 pounds. The shortest power stroke on the smallest Matrix is around 11 inches for something like a Matrix 310 or Sapphire. Unless you are shortening a Matrix rail to have a power stroke of 10 inches or less it would be beyond current factory limits on the Micro limbs. Going over 10 inches power stroke on Micro limbs is going to rapidly get you over 300 pounds to pull it back and you may start to see unusual failures to go along with the higher draw weight. Not recommended without having a shortened rail.
2002 Exomag
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2213 arrows with 4" feathers

User avatar
janesy
Posts: 1113
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: micro limbs on a matrix

Post by janesy » Tue Nov 07, 2017 7:57 am

We need a popcorn emoji
Micro-Hybrid-bulldog 370
Micro 315 fully jambed!
It so hard to choose... Just get one of everything.

User avatar
BrotherRon
Posts: 1902
Joined: Thu Aug 28, 2014 1:47 am
Location: North Central Wisconsin
Contact:

Re: micro limbs on a matrix

Post by BrotherRon » Tue Nov 07, 2017 9:25 am

janesy wrote:
Tue Nov 07, 2017 7:57 am
We need a popcorn emoji
:lol:
Matrix 310/330 Snuffy II~ Hawke XB30 Pro SR ~TT~Tombstone Case.
36" All Weather Tactical Case. Danny Miller Top Mount Quiver
Strings by Boo ~ 8ptbuk ~ nchunterkw
http://www.freewebs.com/kingdomushers/
Prayed up -Looking up- Waiting to be called up.

Arrowflinger
Posts: 366
Joined: Sat Mar 19, 2016 3:51 pm
Location: China Spring, Tx

Re: micro limbs on a matrix

Post by Arrowflinger » Tue Nov 07, 2017 8:48 pm

Hold my beer, I got this.
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR

User avatar
vixenmaster
Posts: 13215
Joined: Wed Sep 14, 2005 2:51 pm
Location: Land of Rocks, Ozarks Mo.

Re: micro limbs on a matrix

Post by vixenmaster » Wed Nov 08, 2017 9:53 am

Puttin Micro limbs on any matrix over a 10 .250 " stroke will be waitin on limbs to break. Now you can put Matrix limbs on a Micro n have a very easy shootin model to practice wid all year!
crossbowcrossroads.com/forum/
Marie Laveau Voodoo Queen Matrix 360 Utahraptor Scorpyd DS
Pipsqueak Hybrid Micro/Matrix 135 lb 235 fps Banshee MXB320
Captain Jack Sparrow Custom Micro 355
[email protected] 417-505-9315

MicroMan355
Posts: 24
Joined: Thu Apr 20, 2017 4:43 am

Re: micro limbs on a matrix

Post by MicroMan355 » Wed Nov 08, 2017 5:33 pm

Fuhgeddaboudit!!! :shock:

mingle
Posts: 78
Joined: Thu Jun 14, 2012 8:27 am
Location: SE michigan

Re: micro limbs on a matrix

Post by mingle » Wed Nov 29, 2017 7:27 am

thxs for the input.Was just thinking outloud lol.

User avatar
Carnivorous
Posts: 2229
Joined: Sun Dec 25, 2005 12:56 pm
Location: Belleriver Ontario

Re: micro limbs on a matrix

Post by Carnivorous » Wed Nov 29, 2017 1:48 pm

If you cut the mainframe down a bit, you can make a sweet micro-matrix hybrid. Just thinking out of the box here.. Lol
A touch of frost has heightened your awareness and your heart steadily beats in anticipation. Your senses are suddenly alert to the movement on the forest floor and you realize that the moment of harvest is at hand.

User avatar
cadmaster
Posts: 128
Joined: Wed Aug 26, 2015 1:35 pm
Location: North Bay, Ontario
Contact:

Re: micro limbs on a matrix

Post by cadmaster » Wed Nov 29, 2017 9:51 pm

I imagine you are looking for more performance. There are a lot of older prematrix (exo) bows that were frankenbowed with matrix and middleton limbs/risers for high FRS I believe some were into the 420 FPS range. considering all the limb problems in the high power designs (which are probably due to minute flaws in very powerful limbs. I would not recommend increasing the design draw length that is all ready in use with the matrix and micro designs.

Post Reply

Who is online

Users browsing this forum: Baidu [Spider] and 22 guests