60 yd with factory string

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
steve rodo
Posts: 615
Joined: Fri Jul 19, 2013 5:56 pm
Location: Buford Ga

60 yd with factory string

Post by steve rodo »

60 yds on a bench .temp 76degree, perfect calm winds.
Some of the center shots missed were me a bit ,not being center.It's not the bow .My magic number is 28 on the optimizer setting tape,is dead nut at 60 yards .Haven't put the right tape on yet till i get the new string today.
Image
2013 380 excalibur X 2 BEE arra's 465gr loaded out arra . HHA Optizimer Lumenocks Red 150gr boltcutters Trigger Teck 1.5lb Dan's Custom String C2 Crank .24% FOC 105KE

A True Friend Never Lie's.
awshucks
Posts: 5238
Joined: Thu Jan 19, 2006 6:40 am
Location: arkansas

Re: 60 yd with factory string

Post by awshucks »

That's good shooting......
"Eze 18:21"
mr meat
Posts: 5257
Joined: Mon Jan 05, 2009 4:40 pm
Location: The land of ice and snow North Bay

Re: 60 yd with factory string

Post by mr meat »

nice!!
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200

matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
JT of PA
Posts: 889
Joined: Sun Aug 26, 2012 9:32 pm
Location: Pennsylvania, USA

Re: 60 yd with factory string

Post by JT of PA »

Well done.
steve rodo
Posts: 615
Joined: Fri Jul 19, 2013 5:56 pm
Location: Buford Ga

Re: 60 yd with factory string

Post by steve rodo »

Thansk folks

Im still waiting on usps to get here with my new flemish string.Im a waitin and waitin .

these shots come from lots of practice on my side .I get lucky once in a while .
2013 380 excalibur X 2 BEE arra's 465gr loaded out arra . HHA Optizimer Lumenocks Red 150gr boltcutters Trigger Teck 1.5lb Dan's Custom String C2 Crank .24% FOC 105KE

A True Friend Never Lie's.
User avatar
Limbs and Sticks
Posts: 3206
Joined: Mon Sep 01, 2008 7:13 pm
Location: Colonial Beach, Virginia, US

Re: 60 yd with factory string

Post by Limbs and Sticks »

Do you think the new string is going to make it more accurate?

Wes
"Maxine"
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
steve rodo
Posts: 615
Joined: Fri Jul 19, 2013 5:56 pm
Location: Buford Ga

Re: 60 yd with factory string

Post by steve rodo »

Limbs and Sticks wrote:Do you think the new string is going to make it more accurate?

Wes
Probally not ,i just want the new string.then ill put the right tape on the dial.i just think it may be a little higher by an " or so .But my windage should stay the same .Im happy the way it is ,if anything ill have to move up or down with new string .
2013 380 excalibur X 2 BEE arra's 465gr loaded out arra . HHA Optizimer Lumenocks Red 150gr boltcutters Trigger Teck 1.5lb Dan's Custom String C2 Crank .24% FOC 105KE

A True Friend Never Lie's.
steve rodo
Posts: 615
Joined: Fri Jul 19, 2013 5:56 pm
Location: Buford Ga

Re: 60 yd with factory string

Post by steve rodo »

xcaliber wrote:Nice shooting, you will have to make a few adjustments with the Flemish, probably a couple clicks up.
Thats what i was thinking .Ill know more when it gets here.
2013 380 excalibur X 2 BEE arra's 465gr loaded out arra . HHA Optizimer Lumenocks Red 150gr boltcutters Trigger Teck 1.5lb Dan's Custom String C2 Crank .24% FOC 105KE

A True Friend Never Lie's.
steve rodo
Posts: 615
Joined: Fri Jul 19, 2013 5:56 pm
Location: Buford Ga

Re: 60 yd with factory string

Post by steve rodo »

Well no string today like it said on the tracking the 29th .Maybe tomorrow .
2013 380 excalibur X 2 BEE arra's 465gr loaded out arra . HHA Optizimer Lumenocks Red 150gr boltcutters Trigger Teck 1.5lb Dan's Custom String C2 Crank .24% FOC 105KE

A True Friend Never Lie's.
Post Reply