Micro 335 & quills
Moderator: Excalibur Marketing Dude
-
- Posts: 188
- Joined: Wed Nov 16, 2011 6:24 pm
- Location: Pennsylvania
Micro 335 & quills
I have a question concerning the quills and my Micro 335.I shoot them using 125 grain broad-head and I have a few with Lumenok. What would my arrow weight be and are they heavy enough to shoot out of my 335. I have been using this set up for awhile now and have taken Deer. Last year my limbs cracked and got a replacement set and they cracked too.i had the warranty work done at Woody’s. Dawn from customer service sent me a new riser and another set of limbs. Should I go to a different arrow with brass inserts and what are good arrows to get.I see some guys talk about Zombies and Executioners. Thanks
Excal Vortex
Excal Micro 335
NAP Spitfire Max 125 grain
Hawke XB Pro 30 SR
Excal Micro 335
NAP Spitfire Max 125 grain
Hawke XB Pro 30 SR
Re: Micro 335 & quills
Heavier arrows always helps with string and limb longevity. Good luck!
Burky247365 Custom Scorpyd Orion Extreme
Re: Micro 335 & quills
Phillyarcher wrote: ↑Sun Sep 13, 2020 7:03 pmI have a question concerning the quills and my Micro 335.I shoot them using 125 grain broad-head and I have a few with Lumenok. What would my arrow weight be and are they heavy enough to shoot out of my 335. I have been using this set up for awhile now and have taken Deer. Last year my limbs cracked and got a replacement set and they cracked too.i had the warranty work done at Woody’s. Dawn from customer service sent me a new riser and another set of limbs. Should I go to a different arrow with brass inserts and what are good arrows to get.I see some guys talk about Zombies and Executioners. Thanks
These are the approximates.... someone else might chime in w more accurate weights:
1. Quill shaft.... 9 gpi
2. Lumenoks......29 gn
3. Aluminum insert-approx 50g
4. Blazers.... 6gn each
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
![Very Happy :D](./images/smilies/icon_biggrin.gif)
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Micro 335 & quills
1. Zombies @9.2gpi= 147.2,
2. 110 g brass insert,
3. BH 125 gn,
4. Lumenoks 29 gn,
5. Blazers 18g
6. Glue approx 10gn
Comes to around 439gn
These numbers are based on a 16” ZS and are fairly accurate.
This is if you go with the Zombie Slayers
2. 110 g brass insert,
3. BH 125 gn,
4. Lumenoks 29 gn,
5. Blazers 18g
6. Glue approx 10gn
Comes to around 439gn
These numbers are based on a 16” ZS and are fairly accurate.
This is if you go with the Zombie Slayers
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
![Very Happy :D](./images/smilies/icon_biggrin.gif)
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Micro 335 & quills
375 with factory aluminum nockPhillyarcher wrote: ↑Sun Sep 13, 2020 7:03 pmI have a question concerning the quills and my Micro 335.I shoot them using 125 grain broad-head and I have a few with Lumenok. What would my arrow weight be and are they heavy enough to shoot out of my 335. I have been using this set up for awhile now and have taken Deer. Last year my limbs cracked and got a replacement set and they cracked too.i had the warranty work done at Woody’s. Dawn from customer service sent me a new riser and another set of limbs. Should I go to a different arrow with brass inserts and what are good arrows to get.I see some guys talk about Zombies and Executioners. Thanks
395 with luminocks.
Give or take a grain or two.
Pretty normal setup, many if not most people would probably be using something similar compared to the number of people on this site using custom arrows.
400 is the sweet spot, but there is no right or wrong as long as you stay over 350(factory arrow-100grain head)
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Micro 335 & quills
Just weighed a quill yesterday with lumenok n 150gr bolt cutter- 415gr which would put ur setup at 390.
Micro 335 Nightmare (Black Bo)
Twilight DLX
Wyvern's Gold Tips
Drstirrup
Matrix 350LE
Twilight DLX
Wyvern's Gold Tips
Drstirrup
Matrix 350LE
-
- Posts: 188
- Joined: Wed Nov 16, 2011 6:24 pm
- Location: Pennsylvania
Re: Micro 335 & quills
Thanks everyone for the good advise. I bought my Micro when it first came out and did not have any problems until last year with the limb issues. Since I got the new riser and the new limbs it’s been shooting pretty good.
Excal Vortex
Excal Micro 335
NAP Spitfire Max 125 grain
Hawke XB Pro 30 SR
Excal Micro 335
NAP Spitfire Max 125 grain
Hawke XB Pro 30 SR