Portable ladderstand
Moderator: Excalibur Marketing Dude
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Portable ladderstand
A few years back l purchased a leverage ladderstand l paid a lot for the telescoping wonder it was built top notch but unfortunately it was not "portable "
Very heavy not something you wanna carry in for the day as nixing the reason I purchased it to begin with.
I figured if l put it up permanently it would more than likely "grow feet" even with a chain.
I exchanged the top of another old api stand l had in the garage and shortened the telescoping ladder to around 12 feet.
It's just enough for me to get up a tree for a 3 hour hunt in the evening or morning and weights 18 pounds.
It's short enough to the trunk that l can swing and shoot behind me too.
I have a short motorcycle style tie down strap l can telescope up and settled in less than 5 minutes.
In my favorite swamp l rarely go more than 12 feet any higher you actually loose visibility.
I'm gonna use the crap outta this little thing.
Very heavy not something you wanna carry in for the day as nixing the reason I purchased it to begin with.
I figured if l put it up permanently it would more than likely "grow feet" even with a chain.
I exchanged the top of another old api stand l had in the garage and shortened the telescoping ladder to around 12 feet.
It's just enough for me to get up a tree for a 3 hour hunt in the evening or morning and weights 18 pounds.
It's short enough to the trunk that l can swing and shoot behind me too.
I have a short motorcycle style tie down strap l can telescope up and settled in less than 5 minutes.
In my favorite swamp l rarely go more than 12 feet any higher you actually loose visibility.
I'm gonna use the crap outta this little thing.
Last edited by longbow joe on Tue Aug 01, 2023 4:04 am, edited 5 times in total.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Portable ladderstand
[url=https://postimg.cc/Mfy3MyZw]
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Portable ladderstand
[url=https://postimg.cc/WtjHCH5b]
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Portable ladderstand
[url=https://postimg.cc/nCXYPKfh]
Simple snap pins are very easy to raise and store
Simple snap pins are very easy to raise and store
Last edited by longbow joe on Mon Jul 31, 2023 11:45 pm, edited 2 times in total.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Portable ladderstand
[url=https://postimg.cc/LgRwVyb5]
I can actually fold the platform but it's so light weight now l probably never will.
Actually weights less than my viper climbing setup.
I can actually fold the platform but it's so light weight now l probably never will.
Actually weights less than my viper climbing setup.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Portable ladderstand
longbow joe wrote: ↑Mon Jul 31, 2023 10:26 pm[url=https://postimg.cc/nCXYPKfh]
Simple snap pins are very easy to raise up mating with any chosen rung in foot n half intervals
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Re: Portable ladderstand
Not too shabby for 21 lb ish
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
-
- Posts: 3431
- Joined: Mon Nov 30, 2009 7:41 pm
- Location: Southern Michigan
Re: Portable ladderstand
My Dad had a ~10ft ladder stand that he loved and hated. It was made out of steel tubing and was about as portable as one could get back in the early 80's. He killed a lot of deer out of it, but he cussed it equally the same. He complained that the portability was its curse. Every time he would have a couple deer cross 75-100 yards away from his stand, he'd eventually climb down and move the stand closer to where they crossed. He wondered if he would have had a lot better luck if he actually sat in it more than moving it around so much.
That looks like a perfect little ladder to sneak in and make a surprise hunt.
That looks like a perfect little ladder to sneak in and make a surprise hunt.
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic
Recovering Excalaholic
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Portable ladderstand
I noticed novix makes a "portable " ladder this year ....its $700 dollars !!! And it weights 47 freaking pounds when will someone invented a true ultralight one.
Duckhunt your father probably had a loc on Titan ladder they were pretty good and very lite weight but the tube sections were a pain in the butt and noisey.
Duckhunt your father probably had a loc on Titan ladder they were pretty good and very lite weight but the tube sections were a pain in the butt and noisey.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 611
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Portable ladderstand
That's a slick setup!
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Portable ladderstand
Nice quickie setup Joe.
It’s not the way you rock, it’s the way that you roll!