Excalibur Crossbow Forum

I have found Ecals warranty very good, never a problem. My complaint is the slow turn around time to get a warranty service. They need warranty service in all Provences, it takes 3 weeks out west to get your bow back.

Set the brace height at 3/8" from the reds, see if this sets things up better for you.

I use 20# bails of rags compressed rag. I rap them in duct tape, and place them in a burlap bag and seal it tight, make a great target. Got mine at Princess Auto.....Canada. Auto supply stores should handle as well. Cost is much less than store bought targets and last a long time. At 20 yards they h...

I have a micro, does it matter what length arrows I shoot in it?
20 inch 22 inch or are the short arrows the only thing to use. 16 or 18 inch.

should have said tried silicone on serving, haved gone to real bee wax. silicone causes serving to move or slip under the preasure of the forks, wax is much more sticky. micro places a lot of tension on the serving. i replaced the serving 3 times before i switched to bee wax. make sure you rub the w...

I only use bee,s wax on the serving, silicone causes it to slip. Causing undue wear.
Warranty service in also advised, but not always what is needed. your dealer should be called as to advicse as to warranty.
Stan

I use only real bee,s wax. Third the other but found it caused serving ware premature. I use it on the rail every 10 to 15 shots. Rotating the serving will also help. Silicone on the serving causes it to slip under the pressure of the forks.
Stan

Great eye candy like your choice.
How do you post pictures on this forum?

I have a micro night mare as well. Have had three sets of limbs replaced. Use mine for target practice when not hunting. Limbs just exploded on mine. Great warranty though, keep cost down, go back to your dealer for service. Right limb exploded the last time after only 149 shots, I keep a record of ...

Purchase two 20# bags of coloured rags from Princess Auto place them side to side and duct tape them together, cost 24$ Canadian works great, arrows go about four to six inches into targets. The tight compact 20# rag packs are packed in plastic, tight is best, get the square ones if you can, match s...

I have one, use it with my micro, I think it works great. I recommend it a great calking tool.

I have 1250 shots on my out of the box Micro. It is in for the second set of limbs at the present time. I have gone through 3 new servings. Left limb goes first and right shows stress fractures or slivering.

I am using mine just the way it came nothing added. This is my policy with a new product. I put it to the test as to what it is a aclaimed to do. I have had one set of limbs replaced, and it is at xcal right now for a second set and examination. The limbs are not standing up for me. I do not modify ...

What kind of serving life can one expect on a Micro? I just got 430 shots, lube every 10 shots with silicone dry lube. Have any of you had to get the limbs replaced on the Micro? My limbs are slivering, and showing odd marks like de lamination. One don't rub their hand on the limb or you get a fibre...

How do you pick the best arrows for a micro? What should you look for when out shopping. What makes one better than the other? I aluminum better than fibreglass? Are ready to use arrows good or does one need to gets them especially make up What makes one arrow more outstanding over the next? I am ne...