Excalibur Crossbow Forum

Live in north carolina, looking at 12 inches of rain and 30 mph winds according to the weather people. Tomorrow may be my last trip to the deer stand for a while.
Bill

Limbs and riser both were changed, I couldn't tell any difference in the look of the riser. Don't know if there is any difference in the micro risers.
Thanks, Bill

Limbs and riser both were changed, I couldn't tell any difference in the look of the riser. Don't know if there is any difference in the micro risers.
Thanks, Bill

Wanted to post a update, Danny worked on the riser and limbs for me, after getting the bow back and reassembled I shot the bow several times and then moved the brace height higher There was no change in point of impact at 30 yards. I have moved the brace height several times with no change in point ...

Put the Nikon bolt on the bow and there was no change to the problem. Talk with Mr. Miller this afternoon and gave him all the information about what was going on. He came to the conclusion that the left limb was weaker than the right. He going to check it out for me. Like the Nikon Bolt by the way....

Have gone through the entire cross bow and found one screw only slightly lose, tighten it and shot an arrow and there was no change of impact. I did give the scope a good wack and it was then shooting 4 inches low at 30 yds. I think I found the problem. Thinking about a nikon bolt.
Thanks Bill

I've done all the screw thing and shooting just one arrow. The bow doesn't have a brace mark on the rail. After finding the spec sheet on line I found that the brace height had been raised to 1.5 to 2 inches on the new bows. I set it at 1.75 and put a mark on the rail and kept the string at that mar...

Hi everyone, I received a 315 micro for Christmas, I put the bumpers from Wyvern on it and a Hawke 1.5x5 scope. I had problem from the start with the arrows changing point of impact after letting the bow rest over night. Notice the string was stretching some over night and the brace height getting c...

Thanks to everyone that responded looks like I'll be trying some GTs. Now half moon or flat nocks?

I know I know Another arrows question, My phoenix came with 4 fire bolts, and I purchased a single GT swift (396) at walmart. The GT shot the 3 broadheads (slick trick mag, G5 striker, Rage 2 blade xbow)that I have the best. Should I go with the GT or stay with the fire bolts and try a heavier broad...

Thanks to all,
Yep I really like the Phoenix, much smother than the Barnett bow I tried.
Thanks, Bill

Thanks guys,
When I click on that it said 404 page not found.
Was wondering if there was another way.
Thanks, Bill

New to the forum, just bought mt first excalibur crossbow a phoenix. It was new but a left over nobody bought. Have only had barnett crossbow before and I'll have to say wow no real way to compare them. I do have one question: is there anyway to register my new bow on line?
Thanks for any help, Bill