Search found 20 matches

by rjhans53
Sat Sep 21, 2019 9:28 pm
Forum: Crossbow Hunting
Topic: Micro arrow opinions
Replies: 15
Views: 6972

Re: Micro arrow opinions

Sorry old school stuff, figured everyone knows it. You put the o-ring on the broadhead shaft, roll it up past the threads, then screw the broadhead in until it's snug then give it a tad bit more until the blades of the broadhead line up with the vanes, you do not need to crush the o ring
by rjhans53
Fri Sep 20, 2019 7:33 pm
Forum: Crossbow Hunting
Topic: Micro arrow opinions
Replies: 15
Views: 6972

Re: Micro arrow opinions

the only thing I might add is that I do use rubber o-rings to tune my broadheads
by rjhans53
Thu Sep 19, 2019 8:53 pm
Forum: Crossbow Hunting
Topic: Micro arrow opinions
Replies: 15
Views: 6972

Re: Micro arrow opinions

I'm having really good luck with factory and easton 16.5 quills with the 150 excalibur bolt broadhead, that broadhead shoots VERY well on my se350, and the new axe340. Also on my 10point shadow nxt and turbo 2. I really like that broadhead
by rjhans53
Fri Sep 13, 2019 6:58 am
Forum: Crossbow Hunting
Topic: new axe
Replies: 5
Views: 1730

Re: new axe

bear you are right, I've tried to figure out how to delete one but I don't see a delete button, any help would be appreciated
by rjhans53
Thu Sep 12, 2019 10:03 pm
Forum: Crossbow Hunting
Topic: new axe
Replies: 5
Views: 1730

new axe

So I put this thing together and the instructions say the bow and rail should be flush, Now to me flush is flush but this thing is a paper or paper and a half thickness off. But now it's really compact if the draw was another 1/2 pound I'd need a crank (was a little concerned about this) I think may...
by rjhans53
Thu Sep 12, 2019 8:17 pm
Forum: Crossbow Hunting
Topic: new axe
Replies: 3
Views: 1492

new axe

So I put this thing together and the instructions say the bow and rail should be flush, Now to me flush is flush but this thing is a paper or paper and a half thickness off. But now it's really compact if the draw was another 1/2 pound I'd need a crank (was a little concerned about this) I think may...
by rjhans53
Wed Sep 11, 2019 5:56 pm
Forum: Crossbow Hunting
Topic: This long range stuff is outta hand
Replies: 9
Views: 2456

Re: This long range stuff is outta hand

practice long and the short stuff is easy
by rjhans53
Wed Sep 11, 2019 12:06 pm
Forum: Crossbow Hunting
Topic: restringing matrix
Replies: 10
Views: 3241

Re: restringing matrix

Well I sort of decided that because the stringer I have (now broke) wasn't usable that I'd take it to the local archery shop to have the brace height and serving redone while I was at it. He was to busy to do it, so I bought an excaliber stringer, brought the head home put it back on the bow and it ...
by rjhans53
Wed Sep 11, 2019 6:38 am
Forum: Crossbow Hunting
Topic: axe
Replies: 11
Views: 4259

Re: axe

I have one coming from wyvern for 574 should be here tomorrow
by rjhans53
Wed Sep 11, 2019 6:24 am
Forum: Crossbow Hunting
Topic: restringing matrix
Replies: 10
Views: 3241

Re: restringing matrix

I'm in the tampa area, and I have ordered a excalibur brand stringer, should be here tomorrow, but the serving needs to be redone any way so I'll probable take to the local bow shop and have it reserved and have the brace hgt adjusted while I'm at it
by rjhans53
Tue Sep 10, 2019 10:07 pm
Forum: Crossbow Hunting
Topic: restringing matrix
Replies: 10
Views: 3241

Re: restringing matrix

this is on a 350 se so no anti dry fire so that's not it, as far as cheap, yep or at least probably bought it on ebay.
by rjhans53
Tue Sep 10, 2019 8:17 pm
Forum: Crossbow Hunting
Topic: restringing matrix
Replies: 10
Views: 3241

restringing matrix

I have a slight problem. I've watch the vid, went to use my string changer and when it got to where it should be held by the trigger, the string got cut by the fingers, the vid shows a sleeve of some kind in the middle of the string, what did i do, buy a cheap one that needs but doesn't have the sle...
by rjhans53
Sat Sep 16, 2017 9:36 pm
Forum: Crossbow Hunting
Topic: 350se brace HT.
Replies: 9
Views: 5325

Re: 350se brace HT.

When I got my 350 LE (I think same bow different package) My brace height was 1 1/4 So I called cs because there is no manual on these bows and was told that what I had was right so that's what I'm going with
Ron
by rjhans53
Mon Sep 11, 2017 6:31 pm
Forum: Crossbow Hunting
Topic: No Archery for me.
Replies: 27
Views: 10974

Re: No Archery for me.

rode it out in the house. sort of strange when it got dead quite at 1 am MOL. lost a 35 year old maple that I put in the ground, the mail box blew over, and minor damage to the roof. Power went out at 11 pm or so and the chain saw came out this am. running generator so we are good, guess it's back t...
by rjhans53
Sun Sep 10, 2017 4:20 pm
Forum: Crossbow Hunting
Topic: No Archery for me.
Replies: 27
Views: 10974

Re: No Archery for me.

Yeh I be stuck at the house too, although I'm more inland than you. the way I get it, the 130 will be in st pete and it will go down a little as you go west. But If the reports are right 90 mile an hour winds aren't anything to sneeze at. I considered bugging out to camp in ga, was showing just a st...