Excalibur Crossbow Forum

Put another scope on it. His cheek weld will be too high. Those are brush guns anyway and the smaller compact the better. 2x7x32.

Let me know what you think of the charger crank. I am thinking of getting one so my wife could use one of the Axes during this years archery season. This will be Maine's first year allowing crossbows during archery season. It would also come in handy when target shooting. After I rope cock this cro...

janesy wrote: ↑

Tue May 19, 2020 5:45 pm

bobcattrapper wrote: ↑

Tue May 19, 2020 5:39 pm

I got everything all set now just one more ? I notice the rail the bow limbs screw on is a tad higher then the mainframe rail. So I take it as normal

Perfectly normal, the arrow travels through the opening

Thanks!

I got everything all set now just one more ? I notice the rail the bow limbs screw on is a tad higher then the mainframe rail. So I take it as normal

No you don't need the locktite on the bracket bolts as they have no stress on them I have brackets on 3 crossbows . Make sure you put locktite on the stirrup screws as they will loosen up . Thanks for the stirrup screws.I will put loctite on those. I never did my matrix stirrup screws and it’s alwa...

I got mine today! Everything looks fine on mine except under the stock forend is a little rough and feels like sandpaper. Closer look little tiny bubbles in the paint right where the palm of my hand goes :roll: oh well. Easy to,put together . I really like the case David sells for them. It not only ...

Good to know they put the loctite on now at the factory.I will just leave it alone and mount the scope .

I am gonna put a Nixon bolt scope on mine. Use the Wyvern’s custom arrows,I got the charger ext coming too. I ordered me a JBK string too. For hunting I am gonna use the Wac em 100 gr. Crossbow broadheads .

If you can use a ball ended Allen Wrench you’re chances are much better at getting them out. Worth every penny for a good set! If they are that tight should they be ok then? I really don’t want to take em out if they are tight. I seen a utube where the fella had his loosen up. So probably just chec...

Ok thanks fellas!

So on a new axe crossbow should I take out the scope rail bolts and put a drop of blue loctite and reinstall or just check em? If so what size hex key? I always loctite the rings and never did the rail on my matrix 330 rail screws and they seem ok.

I have a target out at the land I hunt to shoot in so I probably just use it to crank the bow only. Thanks fellas!

I ordered the Axe 340 this morning. I got the charger too. Case,custom arrows and other goodies. So should be all set

On the utube videos it shows a wrist guard. :crazy: One fella did not use it to crank as he says it’s for if your decocking it. Some use it for both. I can,t imagine putting it on if I was hunting and quick needed to reload my crossbow for maybe another shot.And do you really need it for the axe 340...

Good to know! Thanks!