Excalibur Crossbow Forum

The string on your M380 will stretch some when you first get your CB. One of the advantages of an Excalibur is that you can make this adjustment yourself and not have to take the CB to a bow shop and pay them to do it. Use a stringing aid and put CCW twists into either end of your string to shorten ...

You can make your tree stand lifeline and I suggest that you use 5/8" rope with a short bowline loop in the top end. Put the loop around the tree and run the other end through the loop twice and then tie the end off at the bottom rung of the ladder and/or the tree. Use 1/2" rope for the Pr...

You may want to refer your "dealer" to this site as it is clear that he/she does not have a lot of knowledge about Excalibur CBs and you may save some other folks some grief. I believe that you can do a search for brace height & find many posts on the subject. As far as string twists i...

Ohio man dead after falling from tree stand Posted: Oct 01, 2015 10:39 PM EDT Updated: Oct 01, 2015 10:39 PM EDT By Lauren ChapmanCONNECT HURON COUNTY, MI (WNEM) - An Ohio man died after falling from his tree stand in Michigan. According to the Michigan Department of Natural resources, the 45-year-o...

My POI does not change when I change strings or adjust BH.

I had a similar problem with my Equinox & drilled/tapped for a larger screw. The Equinox rail is different material but same problem although it was my fault.

This article may help with setting the focus scope adjustment.

http://www.wilhelm.co.nz/focusriflescope2.pdf

I have purchased 2 CBs from Pine Mountain Archery and they are good folks as far as I am concerned. Quick service with products as advertised. The special Equinox build was not just for them as others have offered this product on Ebay. I believe it is a bare bones CB with a non-camo rail.

Please remember that it is NOT if but when you will fall!

Two weeks ago I had about 300 pictures during a 7 day period while last week I had over 3700. Several nice shooter bucks are now coming to the feeder as the temp cooled somewhat. That is a Redneck gravity feeder in the pic.

This article gives a very good explanation of how to focus your scope but I believe you are having problems with the far object being out of focus when you turn up the magnification. This would be a defective scope and needs to be replaced in my opinion.

http://www.wilhelm.co.nz/focusriflescope2.pdf

I use a free program called DASHLANE to solve the password problem. You may want to give it a try.

X2, what wildcatter said in SPADES!

This description may help. http://archeryreport.com/2010/03/arrow-flight-fact-fiction-pin-40-yards/ Try this Nikon Spot On program with your data. http://spoton.nikonsportoptics.com/spoton/spoton.html#:5 This is another good program to input your data and see the trajectory. http://www.parkerbows.co...

Outstanding!