Excalibur Crossbow Forum

Watched the webcast. The chairman pointed out that there can be no procedural vote before any legislation is involved.

Kaz is such a tool! They lost again! They will come back in two years with nothing just like last year and this year! He was trying to skew the numbers trying to make himself and the WBH look good but it didn’t work because people can actually READ! See them clowns in two years again! For now all hu...

Regardless of Monday night’s vote, it was put on the agenda for the meeting this morning at 8:30am in Madison which will have no public input! They just won’t give up!

I’ve seen it!

https://www.wyverncreations.com/excalibur-crossbows-c-70/excalibur-matrix-bulldog-360-p-948.html

Looks like one shot caught part of an orange blazer too. I agree with Boo! Looks like damage from shooting tight groups?

Boo recommends the Cavalier serving jig. He’s the string guru for sure so at least I follow his advice. Good luck! I use the cavalier some as well but you need to reinforce the tubes that the serving material rides on or they will bend. If the original tubes are not bending then you are not using e...

Boo recommends the Cavalier serving jig. He’s the string guru for sure so at least I follow his advice. Good luck!

Why wait for a warm day you can site in your scope in doors just screw the bore site on an arrow slide the arrow on the the track some you don't need to cock it and go back how many feet the instructions say and aim it at a wall or door and line up the the scope to it . It will get you on target I ...

Has anyone ever used the Sight Mark Laser Boresight for bolts? I picked this up out of a clearance bin at Fleetfarm for $1.00! You spin it into the insert just like a field tip to sight in your scope from 20-100 yds. I’ve never knew they made these for crossbows? Well for a buck I’d thought I’d give...

When I shoot my Spitfires, I wrap them several times with dental floss. Lighter than electrical tape to keep them as accurate as possible! They never open when wrapping them, but it is rougher on the target this way! Good luck!

I recently had problems with my vanes coming off my carbon shafts. Jerry said it was because I was using a primer on the vanes and using a regular soft set glue, Fletch Tite Platnium to be exact. You’re only supposed to use primer on the vanes if you’re using a super glue type of glues only! Otherwi...

My bow is the same way after installing the ADF and the bow shoots perfectly fine! Doesn’t effect the arrows or the shot nor accuracy.

Swhacker Broadheads all the way! Never lost a deer and cuts through bones too! Gaping exit holes too.

Also try cutting part way through the arrow shaft and turn the arrow while holding the blade depth at the same depth.

I took old adjustable tent poles and made a pvc cup that I cut out 4 grooves, sprayed it with rubber coating. I use it in my pop up blinds, keeps freezing rain and snow from collapsing the blind! They sell a product just like it for $29.99 at most hunting supply stores.