Search found 4473 matches
- Thu Dec 20, 2018 11:54 am
- Forum: Crossbow Hunting
- Topic: Micro 335 Gen 1 Power Stroke?
- Replies: 13
- Views: 3463
Re: Micro 335 Gen 1 Power Stroke?
Comparing the power stroke between the two risers is kind of an apples to oranges situation. Gen 1 had a higher angle riser and a shorter rail 15.75". Gen 2 had a lesser angle(riser is not currently used on almost the entire lineup) and a 1/2 longer rail. His power stroke is only about 4-6 twis...
- Wed Dec 19, 2018 6:07 pm
- Forum: Crossbow Hunting
- Topic: 2019 Excaliburs
- Replies: 56
- Views: 25397
Re: 2019 Excaliburs
I tested the Xmag along side my field points. Literally same hole POI = a confident bow hunter. :) That's a huge deal! I love my wasp drones, but as close as they are I do re zero a bit. I want to be able to practice in my basement all season. But that's costly on tarhets and not much fun in the ba...
- Tue Dec 18, 2018 6:48 pm
- Forum: Crossbow Hunting
- Topic: Micro 335 Gen 1 Power Stroke?
- Replies: 13
- Views: 3463
Re: Micro 335 Gen 1 Power Stroke?
Without a doubt, you are now in 315 configuration. Unless they machined angle into the riser pockets, which I've never heard of being done and would cost them a fortune.
Whatever the reason, don't change anything, enjoy the newfound reliability and easy draw weight.
Whatever the reason, don't change anything, enjoy the newfound reliability and easy draw weight.
- Tue Dec 18, 2018 6:04 pm
- Forum: Crossbow Hunting
- Topic: Micro 335 Gen 1 Power Stroke?
- Replies: 13
- Views: 3463
Re: Micro 335 Gen 1 Power Stroke?
Got a pic of the riser?
- Tue Dec 18, 2018 6:14 am
- Forum: Crossbow Hunting
- Topic: measurements of short and compact xbows
- Replies: 8
- Views: 2703
- Tue Dec 18, 2018 6:14 am
- Forum: Crossbow Hunting
- Topic: measurements of short and compact xbows
- Replies: 8
- Views: 2703
Re: measurements of short and compact xbows
From one end of the micro lineup, you got the 308shorts at 30" and the suppressor at 31".
315=32
335= 32.5
355=33
Give or take, I haven't owned a non BD micro in a while now
315=32
335= 32.5
355=33
Give or take, I haven't owned a non BD micro in a while now
- Sun Dec 16, 2018 2:31 pm
- Forum: Crossbow Hunting
- Topic: 2019 Excaliburs
- Replies: 56
- Views: 25397
Re: 2019 Excaliburs
I'm probably in on a Bulldog 440.... I still like the simplicity of it over the Assassin... I'm curious what the dimensions will be. If the BD380 is 35" and the bd400 is 35.75". Does that mean the 440 is 1.5" longer again? Or have they tweeked the riser. If that's the case... I want ...
- Sat Dec 15, 2018 7:14 pm
- Forum: Crossbow Hunting
- Topic: Cleaning Diablo shafts
- Replies: 9
- Views: 3289
Re: Cleaning Diablo shafts
Wear rubber gloves too prevent severe skin cracking, especially in the winter when hands are more dryer than other times of the year. I also step out on the deck when using acetone and I prefer not to store my soiled rags inside the house garbage. Good point. Oddly enough, the old MSDs for acetone ...
- Sat Dec 15, 2018 3:36 pm
- Forum: Crossbow Hunting
- Topic: Cleaning Diablo shafts
- Replies: 9
- Views: 3289
Re: Cleaning Diablo shafts
Acetone. Read the instructions, nasty stuff.
- Sat Dec 15, 2018 2:45 pm
- Forum: Crossbow Hunting
- Topic: Finally out for a sit
- Replies: 3
- Views: 1283
- Sat Dec 15, 2018 10:51 am
- Forum: Trophy Room
- Topic: Finally got one that I got on cam
- Replies: 8
- Views: 28089
Re: Finally got one that I got on cam
Dandy buck! Great work
- Sat Dec 15, 2018 9:22 am
- Forum: Crossbow Hunting
- Topic: Members Profiles
- Replies: 26
- Views: 9370
- Sat Dec 15, 2018 9:13 am
- Forum: Crossbow Hunting
- Topic: Axiom Velocity
- Replies: 21
- Views: 7870
Re: Axiom Velocity
Thanks guys, I will stick with my bolts and 150 heads to keep penetration and and a good FOC balance and look into getting a custom string from the forum. That ought to pick me up a few fps. Then I'll just do as XB did and pattern my reticle marks with a good rangefinder. Thanks to everyone for ste...
- Sat Dec 15, 2018 7:07 am
- Forum: Crossbow Hunting
- Topic: Deer hides
- Replies: 7
- Views: 3413
Re: Deer hides
Roads department? Tow truck drivers?
They used to call one guy around here and he'd come get them every time. He gone now tho, so who knows if they would do that
They used to call one guy around here and he'd come get them every time. He gone now tho, so who knows if they would do that
- Fri Dec 14, 2018 7:14 pm
- Forum: Crossbow Hunting
- Topic: 2019 Excaliburs
- Replies: 56
- Views: 25397
Re: 2019 Excaliburs
I was looking again, at the pics, looks like the assassin 420 is using matrix limbs? Or am I seeing that wrong.
The take down feature does look cool, with the stirrup being the lever on the locking mechanism
The take down feature does look cool, with the stirrup being the lever on the locking mechanism