Search found 1208 matches
- Sat Jan 27, 2018 1:25 pm
- Forum: Crossbow Hunting
- Topic: Trigger Noise
- Replies: 4
- Views: 2380
Re: Trigger Noise
I hear this all the time, and have to think, you moving and looking back is what the deer react to. I have shot at deer with others over 50 yards away, and they don't jump, when they see the deer shot kick and take off, they look, and then when they see it keeps running away, they go the same direct...
- Thu Jan 25, 2018 10:54 am
- Forum: Crossbow Hunting
- Topic: Checking in again.....
- Replies: 19
- Views: 6912
Re: Checking in again.....
Sorry to hear about the struggles and the illness in the family, but good to hear it's improving,, good luck Anthony hope all stays on the good side, prayers for all,,,
- Thu Jan 25, 2018 10:48 am
- Forum: Crossbow Hunting
- Topic: Assasin
- Replies: 87
- Views: 30948
Re: Assasin
lotta nice features, but the traveling cartridge, I don't care for, thats a pain to disconnect if you don't want it on the string when uncocking, the extra steps to adjust strings, over 9 pounds, I think I'll stick with what I got, and not give up the extra performance for now. I think maybe add som...
- Thu Jan 25, 2018 10:24 am
- Forum: Crossbow Hunting
- Topic: nchunterkw
- Replies: 21
- Views: 7779
Re: nchunterkw
Hope ya have a good one and have it your way today! Happy Birthday!!!
- Wed Jan 24, 2018 8:08 pm
- Forum: Crossbow Hunting
- Topic: C2 Crank Handle
- Replies: 10
- Views: 3441
Re: C2 Crank Handle
that should make for comfortable and secure cocking,, nice job!
- Tue Jan 23, 2018 8:02 pm
- Forum: Crossbow Hunting
- Topic: Most Sought After '18
- Replies: 36
- Views: 17192
Re: Most Sought After '18
I would have went with the 400 bulldog cut down with a Matrix front end fit to it, to give me the same draw length the older 405 had and would have had a personalized 405 Bulldog with an integrated cocker,, Im impressed with Xcalibur’s preventive thinking. I’d considered putting my original M405 ri...
- Tue Jan 23, 2018 1:23 pm
- Forum: Crossbow Hunting
- Topic: The new Excalibur crank
- Replies: 96
- Views: 32320
Re: The new Excalibur crank
Peter we had a clumsy contraption to carry around already, we need or, I will, have a device that is integrated, that I can use as it is always there, or have the option of using a device, rope cocker if you will, when I want and am able. This is what I waited for, but that was my mistake not Excali...
- Tue Jan 23, 2018 12:07 pm
- Forum: Crossbow Hunting
- Topic: Most Sought After '18
- Replies: 36
- Views: 17192
Re: Most Sought After '18
I will say if Excalibur would have added a true integrated cocker that could be used on the Micros and Bulldogs, I would have went with the 400 bulldog cut down with a Matrix front end fit to it, to give me the same draw length the older 405 had and would have had a personalized 405 Bulldog with an ...
- Tue Jan 23, 2018 11:46 am
- Forum: Crossbow Hunting
- Topic: Most Sought After '18
- Replies: 36
- Views: 17192
Re: Most Sought After '18
I'll probably have an Assassin, with all the garbage stripped off, Air Brakes, Gone, limb jax Gone, wedges on the inside of the limbs Gone, This is what I did with my Suppressor and loved the balance with the lightened up front end. With all this baggage on the front end I thought it was front heavy...
- Tue Jan 23, 2018 11:30 am
- Forum: Crossbow Hunting
- Topic: Hawke XB 30 Pro
- Replies: 13
- Views: 6274
Re: Hawke XB 30 Pro
X2 What IronNoggin said, best maybe not a Schmidt and Bender, but the best glass your going to find in a dedicated crossbow scope that will give yoou spot on aiming points every 10 yards from 20 to a hundred, I can even set mine for 30 yards and have every ten yard aiming points out to 100! I The XB...
- Tue Jan 23, 2018 11:12 am
- Forum: Crossbow Hunting
- Topic: The new Excalibur crank
- Replies: 96
- Views: 32320
Re: The new Excalibur crank
I think they had plenty of time to make crank system that fir the bows, the ancient Tenpoint Accudraw can be retrofit up to the 380's and are part on my bow for the same money, sad Excalibur with others on board today can't come up with anything but a bulky winch you have to pack with you,that is no...
- Mon Jan 22, 2018 9:20 pm
- Forum: Crossbow Hunting
- Topic: The new Excalibur crank
- Replies: 96
- Views: 32320
Re: The new Excalibur crank
So this is what I waited over 2 years for,,,, I think my C2 is smaller, and I don't need to drill a thing,, I for one am extremely disappointing,, it's not the high tech piece of intelligent tooling I was expecting,,,,, I just can't call this huge contraption an upgrade to what I already have. I thi...
- Fri Jan 12, 2018 9:11 pm
- Forum: Crossbow Hunting
- Topic: The new Excalibur crank
- Replies: 96
- Views: 32320
Re: The new Excalibur crank
to me this is the biggest let down from Excalibur ever! I was so bumbed when I seen this massive contraption after telling everyone I new those hollow but's and that lug on all these new bows was for the new crank for the bows. Then find out it is as big and clumsy as the C2 I already have, and don'...
- Fri Jan 12, 2018 8:59 pm
- Forum: Crossbow Hunting
- Topic: Length of Excalibur ownership?
- Replies: 50
- Views: 21446
Re: Length of Excalibur ownership?
hell I don't know, ain't to good at math,, but I know I had the Lynx as soon as they were avalable, and was so happy with it, I had the M380 Mad Max as soon as it was released,,, still got em. The 350 Matrix, I had before Excalibur decided to cut the 405's up they had left in stock, so I've had a re...
- Fri Jan 12, 2018 8:46 pm
- Forum: Crossbow Hunting
- Topic: Matrix 380 Owners
- Replies: 24
- Views: 10883
Re: Matrix 380 Owners
I have owned a Suppressor, Micros, Matrix 405, 330, and Exo series bows, but those are gone but I still own the 380,, and this why, 50 yards, 5 shots, at 1.5" bulls, and every arrow inside the bottom half of the bull, all within 1/2 of the exact same POI. https://s19.postimg.org/ip9d9hhf7/3scop...