Excalibur Crossbow Forum

sproulman

I use small 7" piece of brass rod and never had one I could not get out. I have read here that some use drill bit others use section of rifle cleaning rod. Drill bit can split shaft as it mushrooms the brass insert trying to get it out .. Shop uses a rod that just fits inside and taps with ham...

sproulman

It's simple... acetone. Put the insert end down into a jar just deep enough to cover the insert inside of the shaft. Acetone breaks down the adhesive and the insert comes out. Has never hurt any shafts that I am aware of. I've shared this info several times on here and other forums but apparently p...

sproulman

I was at bow shop and saw them using solder iron to remove inserts .. They sell this tool also.. So took my arrow to lowes to see if I could get screw with threads like field point... I found screw I think it was like8/ 32number on pack and about inch and half long.. Cut head off screw and took sol...

sproulman

How do you delete your post ?

sproulman

sproulman wrote: ↑
Wed Aug 07, 2019 7:06 am
I do not hunt my yard bucks ,too easy ...
I hunt publicland wayback in Pa Wilds its hard as heck today and carrying #21 climber is getting old at 65 ...
I cannot have it easy it has to be hard ...

sproulman

Have not been on in awhile ...Lost interest fir some reason?
Like Thank all of you fir help and info over years ...
A few of you I talked on phone when I had question you folks are best ....
Again Thanks ...

sproulman

papa bear1 wrote: ↑
Tue Aug 06, 2019 8:52 am

sproulman wrote: ↑
Tue Aug 06, 2019 12:04 am
.
WHAT ??????
I didn't hear you ..

I am terrible on internet typing etc ...I have nephew trying to help me but he talks to fast .

sproulman

I do not hunt my yard bucks ,too easy ...
I hunt publicland wayback in Pa Wilds its hard as heck today ...
I cannot have it easy it has to be hard ...

sproulman

bigbowman wrote: ↑
Tue Aug 06, 2019 8:51 pm
I was surprised to see that the BD380, BD400, Micro 355, Micro 315 and the Grizzly all are now listed as discontinued! Dam, I just bought my BD380 last month! This month it’s discontinued!

Must feel that micro 335 is still good seller ?

sproulman

Will Axe limbs fit on micro 335 ?

sproulman

I was at bow shop and saw them using solder iron to remove inserts .. They sell this tool also.. So took my arrow to lowes to see if I could get screw with threads like field point... I found screw I think it was like 32number on pack and about inch and half long.. Cut head off screw and took solder...

sproulman

From member here with less experience on crossbows ...
When I got my first set of arrows fir my micro 335
goldtip they did it ..Terrible....
Think they were .005 not sure ...
You could see it ....
Went to zombies .003 no problem....
It was spine....

sproulman

sproulman

:) One of the main reasons why I like climbing stands. Over the years I have killed more bucks the first time hunting a spot than anything else. I also like to be able to react to sign immediately. A great stand location is worth it’s weight in gold, hope you get a great spot Joe! Publicland in arch...

sproulman

Got big logging chain and leaving my Summit Climber on tree...Take seat home with me..
In gun season using ladder stand with Summit top only carry in and out daily ...
This way when cold n o climbing tree etc just put top on tree ...

Excalibur Crossbow Forum

Search found 1616 matches

Re: Removing carbon arrow inserts easy...

Re: Removing carbon arrow inserts easy...

Re: Removing inserts

Re: 3 Young Bucks At The Edge Of My Property

Re: 3 Young Bucks At The Edge Of My Property

Thanks fir help and info

Re: Tree stand dilemma

Re: 3 Young Bucks At The Edge Of My Property

Re: AXE 340

Re: AXE 340

Removing inserts

Re: Arrow fish tailing

Re: Tree stand dilemma

Re: Tree stand dilemma

Re: Tree stand dilemma