Excalibur Crossbow Forum

Better late then never. Happy B-Day !!

Sling solved, cut camo patterned Lanyard, flattened ends with lighter and tied a Quarter size loop to each sling post on Xbow. Took an adjustable shoulder strap with plastic clips on each end from a large Duffle bag (unused). Clipped strap to loops on Xbow- sling. Quick on and off no metal to metal....

I have taken 8-9 deer with a GT II and a Rage 3. All dropped under 50 yards except one which went 80-90 in the snow. Specs: -GTII, Rear insert cut in half and hollowed, and 35 grains added to the back of the front insert. -2" Blazer vanes -100 grain Rage 3 Thanks for the reply, fill me in on t...

Are you using the 110 g. brass inserts in the firebolt for more FOC weight? I find that the brass insert in the firebolt shoots a heck of tight group out to 50 yrds shooting 100g grizz tricks. Love them in the wind..they only drift when I had a crosswind of about 10mph 2 inches at 50 yrds. and were...

Interested in what Bolt/Broadhead combination works best for members?
I went from the FireBolt/125Mag Slick Trick to the FireBolt/Boltcutter.
The wind played havoc on the FireBolt/125Mag Slick Trick combination! No problems with the FireBolt/Boltcutters!

Even provide a self adhesive Decal with a dull appearance-no glare? I'm sure they could go through the vendor who prints the Excal Decal
that comes with the Xbow at time of purchase.

Not happy with the Sling I have, the material on the padding is way to noisy!
The Sling doesn't have quick-detach swivels. Poor purchase
Is the material on the Excal sling quiet? Looking for different options and
has anyone seen or used the Sling/Pack by GamePlan 'Crossover' Crossbow Pack.

Good for you! Tell the Mrs to move over!

enormous wrote:Yup, that was me. Wish I would have known and introduced myself.

Same here! I like the cheek piece I added one to my Vortex.

enormous wrote:Was that you standing next to me? I was the 6'4 guy with the black fleece pullover talking to Peter.

I looked at the scope right after you before Peter put it back in the box.

enormous wrote:Was that you standing next to me? I was the 6'4 guy with the black fleece pullover talking to Peter.

That answer would be yes if you were commenting about driving.

Had a chance to see the DLX Scope today here in Michigan very nice!
Also what to thank Peter and his Show partner for taking the time and providing me with
what I needed for the DB Bar removal. Thanks guys!

Dereck wrote:You can get the beveled washers at most Excalibur dealers my local shop had them in stock.
Or you can do what I did with my kids Vixen one of the d bars was bent slightly so I cut them off and kept the beveled part.

I'll look into it thanks again!

Thanks Wheelie, I take it Excal is who I would contact for the bolts and washers.

Ok thanks Boo! I gather this will not affect anything?? Thanks again, I was really worried after forgeting to take the pads off, I checked them over and theyre fine but like I said the other two cracked... but if this is ok then i can sleep easy lol. If it were my bow I would remove the DB bars com...