Gorrilia ladder stands!

perrysbirds · Post by **perrysbirds** » Wed Nov 04, 2009 6:09 pm

I have one of these 17 foot ladder stands.I was wondering where I can get thoses wire pins that fit in the holes that hold the sections of the ladder together.I took my stand down today and notice that a couple of those pins were missing.I guess sometimes they just pop out.Im just looking for a few replacement ones and too have a couple on hand.I know its easy just to put a bolt and nut through the hole but these pins are alot easier.

Thanks Perry

gogo · Post by **gogo** » Wed Nov 04, 2009 6:19 pm

Tsc stores, Canadian tire, even hardware stores should have the pins. If there is a store near you that sells tractors, riding lawnmowers etc should also have them.

Kelley · Post by **Kelley** » Thu Nov 05, 2009 9:00 am

You can also use bolts and nuts if you are a REDNECK.
Kelley

perrysbirds · Post by **perrysbirds** » Thu Nov 05, 2009 9:14 am

I think I live in Redneck territory for sure.I was scouting some property this summer and found a homemade treestand with the backseat of some oldy car for the seat up in the tree.All leather too.

Dumbazz · Post by **Dumbazz** » Thu Nov 05, 2009 8:43 pm

Give me your address and you will get a couple in the mail....