Hope everyon'e having a great holiday season!
I have a question I was hoping someone could shed some light on. My Tact Zone died so I put my varizone on my 380 until my replacement comes and was out shooting it today at the Rhinehart 18-1. What I found was that 20 & 30 yds it's amazingly dead on. 40 yds about 1.25" left and at 50 it's approx 3.5" low and approx 3" left.
Any advice on how to go about correcting the poi at 40 - 50? Speed ring is set to 350 and I'm shooting 18" BE's with brass front and 125 slick trick. Thanks very much for any advice.
POI Question
Moderator: Excalibur Marketing Dude
POI Question
The meat don't fry if the arrow don't fly!
===========
Matrix 355
Exocet 165
===========
===========
Matrix 355
Exocet 165
===========
-
- Posts: 321
- Joined: Tue May 24, 2011 9:18 pm
- Location: Brooklyn, MI
Re: POI Question
Sounds to me your scope is not vertical when you shoot. Maybe scope is but bow might not be.
Re: POI Question
Sounds to me like your scope hairs are tilted a tad. Try a torpedo level on the rail and a plumb bob w/ heavy line at 20 yds or so 1st off..........
"Eze 18:21"
Re: POI Question
That makes a lot of sense. I'll give the scope a look to make sure the crosshair is as close to perfectly vertical as possible. Thanks very much for the advice.
The meat don't fry if the arrow don't fly!
===========
Matrix 355
Exocet 165
===========
===========
Matrix 355
Exocet 165
===========