Arrow Puller and Bolt help...
Moderator: Excalibur Marketing Dude
-
- Posts: 29
- Joined: Sat Jun 21, 2014 4:47 pm
- Location: Toronto, Canada
Arrow Puller and Bolt help...
Hi all, I've been reading about an arrow puller made by a chap named Danny Miller, almost unanimously it's rated as the best puller on the market. I'm interested in purchasing one but I can't seen to find a website that is selling them. Am I not looking in the right place or something? can someone tell me where, or how I go about getting a hold of one of these. Thank you..
Also, I'm interested in trying my hand at building my own bolts for my 380, I've been reading on here that users are having great success with Black Eagles and Gold Tips, what I need to know is what is the number for the shaft spine I should be using, or does that even matter with a graphite shaft (I noticed on Black Eagles website, they only ask for a "run out" number and the quantity when ordering blank shafts), I was thinking of using Black eagle executioners or maybe Gold Tip Laser II or maybe III's. These will be 18" bolts and I'll be keeping the total finished bolt weight between 350 and 400 grams. I'm new to all this, so any suggestions will be greatly appreciated (please include part numbers etc. with your suggestions if possible, it'll help me a GREAT deal when purchasing stuff) thanks in advance...
Also, I'm interested in trying my hand at building my own bolts for my 380, I've been reading on here that users are having great success with Black Eagles and Gold Tips, what I need to know is what is the number for the shaft spine I should be using, or does that even matter with a graphite shaft (I noticed on Black Eagles website, they only ask for a "run out" number and the quantity when ordering blank shafts), I was thinking of using Black eagle executioners or maybe Gold Tip Laser II or maybe III's. These will be 18" bolts and I'll be keeping the total finished bolt weight between 350 and 400 grams. I'm new to all this, so any suggestions will be greatly appreciated (please include part numbers etc. with your suggestions if possible, it'll help me a GREAT deal when purchasing stuff) thanks in advance...
-
- Posts: 4806
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Arrow Puller and Bolt help...
Danny doesn't do websites! Call him on the phone. It's worth the dime to talk to him as he is a bona fide Excal guru.740-483-2312
Re: Arrow Puller and Bolt help...
X2.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Arrow Puller and Bolt help...
X2.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Arrow Puller and Bolt help...
X3, and you can buy your arras from him too!
It’s not the way you rock, it’s the way that you roll!
Re: Arrow Puller and Bolt help...
Welcome! Thought there was some one in Canada selling Danny's puller.......
Hope that was a typo, arrows are measured in grains, 15.34 gr in a gm[gram]I'll be keeping the total finished bolt weight between 350 and 400 grams.
"Eze 18:21"
Re: Arrow Puller and Bolt help...
The Bow Shop in Waterloo carried them at one time. Not sure if they still do.
The most important blood trail leads to the Cross...
Phoenix
HHA Optimizer
Hawke scope
Boo strings
Boo tuned trigger
Phoenix
HHA Optimizer
Hawke scope
Boo strings
Boo tuned trigger
Re: Arrow Puller and Bolt help...
Yes a few week's back I saw 4-5 on the rack in thereTPM wrote:The Bow Shop in Waterloo carried them at one time. Not sure if they still do.
-
- Posts: 4806
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Arrow Puller and Bolt help...
If you buy these in Canada you may save postage but will miss out on a great conversation! Great guy, lots of knowledge.
- walleyeslammer
- Posts: 13
- Joined: Mon Jan 27, 2014 12:11 am
- Location: mcgregor, ontario, canada
Re: Arrow Puller and Bolt help...
got mine off of BOO on here... has the Danny Miller arrow puller's and arrow's for us people in Canada... He is in Ontario also, so not all that much for s/h... BOO is in Toronto also...
http://www.excaliburcrossbow.com/phpBB2 ... =4&t=48279
http://www.excaliburcrossbow.com/phpBB2 ... =4&t=52422
http://www.excaliburcrossbow.com/phpBB2 ... =4&t=48279
http://www.excaliburcrossbow.com/phpBB2 ... =4&t=52422
matrix 380 xtra
-
- Posts: 29
- Joined: Sat Jun 21, 2014 4:47 pm
- Location: Toronto, Canada
Re: Arrow Puller and Bolt help...
awshucks wrote:Welcome! Thought there was some one in Canada selling Danny's puller.......
Hope that was a typo, arrows are measured in grains, 15.34 gr in a gm[gram]I'll be keeping the total finished bolt weight between 350 and 400 grams.
Good catch, yes I meant grains LOL, thanks...