Bigredopie Build along
Moderator: Excalibur Marketing Dude
-
- Posts: 2430
- Joined: Sun Dec 18, 2011 6:23 pm
- Location: North Carolina
Re: Bigredopie Build along
Looking awesome as a masterpiece comes alive
Stryker Katana 360
Black Eagle Zombie Slayers
TruGlo Titanium X Hybrid Broadheads
Black Eagle Zombie Slayers
TruGlo Titanium X Hybrid Broadheads
- Starvin' Hillbilly
- Posts: 790
- Joined: Wed Mar 26, 2014 10:34 am
- Location: Arkansas
Re: Bigredopie Build along
just got caught up w/ da build . . .beautiful!!
You see, in this world there's two kinds of people, my friend: Those with loaded guns and those who dig. You dig.-Blondie,
The good, the bad, the ugly
The good, the bad, the ugly
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
4 coats and not so thirsty.
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Seven coats and all shiny. Tomorrow the big wet sand from 320grit, 400, 600,and finally 1500.
Re: Bigredopie Build along
A fine looking piece!!! a one of a kind for sure!
-
- Posts: 398
- Joined: Fri Dec 02, 2011 11:37 pm
- Location: MO Bootheel
Re: Bigredopie Build along
Wow seven coats, that must be close to a record That stain really makes the wood pop!
380 Matrix, Vortex, Y25, Exomag and Brown Vixen
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
Re: Bigredopie Build along
Very nice piece of work that.
Sure the dear will be queuing up for the honour of being shot by it......
Sure the dear will be queuing up for the honour of being shot by it......
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Have is a pick before wet sanding. Hope that you can see the shine on the cheek.
This is after I wet sanded it with 320grit. Notice the shine is gone and the wood has a deep luster.
I use the finish for wet sanding. The 320grit is the workhorse and take the surface finish down and fills the grain. Next the 400grit which still takes a little off but start to polish also. All this has to be done no more than 24 hours after the last coat of finish because this finish gets rock hard and unworkable. And then you are how you say screwed.
This is after I wet sanded it with 320grit. Notice the shine is gone and the wood has a deep luster.
I use the finish for wet sanding. The 320grit is the workhorse and take the surface finish down and fills the grain. Next the 400grit which still takes a little off but start to polish also. All this has to be done no more than 24 hours after the last coat of finish because this finish gets rock hard and unworkable. And then you are how you say screwed.
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Wet sanded all the way to 1500grit. Need to let the finish cure over the weekend and then I can wax it. Drill holes for the rail screws and one for the sling and she be done. Hope you like it Alan.
- way123hockey
- Posts: 475
- Joined: Wed Aug 06, 2014 1:46 pm
- Location: Simcoe County, Ontario
Re: Bigredopie Build along
All I can say is "WOW". You are an artist in your profession Aging.
Matrix 355 Blackout
Katana 385 BlackOps
Custom Black Vixen
Vixenmaster Strings
Munch Mounts
Wabi Calls
Katana 385 BlackOps
Custom Black Vixen
Vixenmaster Strings
Munch Mounts
Wabi Calls
-
- Posts: 398
- Joined: Fri Dec 02, 2011 11:37 pm
- Location: MO Bootheel
Re: Bigredopie Build along
I am speechless. She is more beautiful than I could have imagined. You are truly a master at your craft.
380 Matrix, Vortex, Y25, Exomag and Brown Vixen
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Glad that you like it Allan. That Quilted maple is the most unpredictable wood I've used. Take a look at the blank when I started and it did not show ANY dark lines in it at all. Where did they come from.bigredopie wrote:I am speechless. She is more beautiful than I could have imagined. You are truly a master at your craft.
-
- Posts: 398
- Joined: Fri Dec 02, 2011 11:37 pm
- Location: MO Bootheel
Re: Bigredopie Build along
Ok folks, here is the finished product. Unfortunately I don't have a background as nice as Vixenmaster's recent pics but I am still trying
She turns heads everywhere we go and she feels even better than it looks. Mike is truly a magician with a block of wood.
She turns heads everywhere we go and she feels even better than it looks. Mike is truly a magician with a block of wood.
380 Matrix, Vortex, Y25, Exomag and Brown Vixen
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
-
- Posts: 4970
- Joined: Sun Nov 24, 2013 11:32 pm
- Location: Coquitlam, British Columbia
Re: Bigredopie Build along
That is so gorgeous I can't even believe it...and I've followed along from the beginning. Truly a piece of art. Wow! I see you use the Optimizer as well, is the cheek piece higher than the stock cheek piece and if so much how much?
You're only paranoid if everyone isn't out to get you.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.