I can't reach the trigger
Moderator: Excalibur Marketing Dude
Re: I can't reach the trigger
Where is hunlee ??
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: I can't reach the trigger
If you still are having the same issue Call Excal and talk to them.
- GrassyKnoll
- Posts: 1421
- Joined: Sun Dec 12, 2010 9:13 am
- Location: Jackson, NJ
Re: I can't reach the trigger
When you took the rail off the stock to change out your trigger, you did put the rail back onto the stock properly so that the rail is sitting all the way back into the stock and your two retainer screws for the rail and stock match up and tighten down... Correct???
Matrix 380 Xtra with Vortex Viper XBR, Trigger Tech,
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
- one shot scott
- Posts: 7025
- Joined: Wed Sep 10, 2008 10:20 pm
- Location: Ontariooh ohh
Re: I can't reach the trigger
5 pages of real good advice. Not much more to be said without a picture or even better: a video. You either lost muscle in the arms or you have interference in some shape or form.
Use photobucket to upload a video or picture. Using a photo from your computer memory directly does not work. If no response, will assume you figured er out.
http://www.excaliburcrossbow.com/phpBB2 ... et#p571562
Use photobucket to upload a video or picture. Using a photo from your computer memory directly does not work. If no response, will assume you figured er out.
http://www.excaliburcrossbow.com/phpBB2 ... et#p571562
*thumbhole vixen*original relayer*y25relayer*matrix380-
Re: I can't reach the trigger
Shorten your string an inch or two and try cocking the bow.
The OP would be better served if someone who speaks Spanish could have a private chat with him. I feel as if there is info missing, possibly because of a language barrier.
The OP would be better served if someone who speaks Spanish could have a private chat with him. I feel as if there is info missing, possibly because of a language barrier.
Some people just like stepping on rakes
Re: I can't reach the trigger
This is the bow with only the trigger installed
http://www.mediafire.com/view/a1f2b9qol50ijmd/Bow.JPG
This is the front of the trigger
http://www.mediafire.com/view/fzg740vy6 ... _front.JPG
This is the rear of the trigger
http://www.mediafire.com/view/bt1bxnoq6 ... r_rear.JPG
This is the Brace Height
http://www.mediafire.com/view/dditk6ufa ... height.JPG
This is as far as the string goes
http://www.mediafire.com/view/cotv64kdb ... s_far1.JPG
http://www.mediafire.com/view/dwqtmwq6l ... _far_2.JPG
Sorry but this is the only way I can post the pics. As you can see, the string cannot reach the trigger by little.
http://www.mediafire.com/view/a1f2b9qol50ijmd/Bow.JPG
This is the front of the trigger
http://www.mediafire.com/view/fzg740vy6 ... _front.JPG
This is the rear of the trigger
http://www.mediafire.com/view/bt1bxnoq6 ... r_rear.JPG
This is the Brace Height
http://www.mediafire.com/view/dditk6ufa ... height.JPG
This is as far as the string goes
http://www.mediafire.com/view/cotv64kdb ... s_far1.JPG
http://www.mediafire.com/view/dwqtmwq6l ... _far_2.JPG
Sorry but this is the only way I can post the pics. As you can see, the string cannot reach the trigger by little.
Re: I can't reach the trigger
OK, try this. Get a small allen wrench, or a nail, close to the same diameter as your string. Pull on the ADF, and Trigger latches with it. You should here a click, or it won't move. If it clicks at both positions, pop the trigger, then try cocking it. If it does not click, pop the trigger to see if one, or both are already loaded. If they are jammed, you could have screws that are too long in the scope mount.
Good Luck!
Good Luck!
It’s not the way you rock, it’s the way that you roll!
Re: I can't reach the trigger
He has no ADF or scope base/mount installed Dan.xcaliber wrote:OK, try this. Get a small allen wrench, or a nail, close to the same diameter as your string. Pull on the ADF, and Trigger latches with it. You should here a click, or it won't move. If it clicks at both positions, pop the trigger, then try cocking it. If it does not click, pop the trigger to see if one, or both are already loaded. If they are jammed, you could have screws that are too long in the scope mount.
Good Luck!
Some people just like stepping on rakes
Re: I can't reach the trigger
Dennis, this picture tells me that you should shorten your string.
Some people just like stepping on rakes
Re: I can't reach the trigger
puede usted bajar las garras de gatillo con un lápiz??? Que traben en su lugar
acortar la cadena de
escuchar a boo sabe su mierda
acortar la cadena de
escuchar a boo sabe su mierda
Re: I can't reach the trigger
You said a bad word!rein1 wrote:puede usted bajar las garras de gatillo con un lápiz??? Que traben en su lugar
acortar la cadena de
escuchar a boo sabe su mierda
Some people just like stepping on rakes
Re: I can't reach the trigger
Boo wrote:You said a bad word!rein1 wrote:puede usted bajar las garras de gatillo con un lápiz??? Que traben en su lugar
acortar la cadena de
escuchar a boo sabe su mierda
oops sorry ,,
Re: I can't reach the trigger
Boo, by "string" you mean the cocking aid rope?
Re: I can't reach the trigger
Yes.darwal44 wrote:Boo, by "string" you mean the cocking aid rope?
Some people just like stepping on rakes
Re: I can't reach the trigger
Yes your cocker rope looks too long
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!