Aluminum Arrows
Moderator: Excalibur Marketing Dude
Re: Aluminum Arrows
I've been shooting carbon sense I started cross bow hunting about eight years ago and when i got my micro i cut my quills down to 15" they are 357 grains i had decent groups at 60 but I didn't like the weight so i put brass incerts in and it made them a little better there about 398 grains. Then Cal from pine mountain sent me a few 15" 2219 i think they were around 420 grains and they would be touching at 60 yards .. So ill be switching to 2219 s in the future. My only problem is i like the threaded nocks on excal carbon but I haven't been able to find them for a 2219 anyone know who makes them? And i will have around nine quills for sell in a few weeks ..
Micro
Jack pine string
15" 2219 with 125 grain spitfires
Hawke scope
TT single stage trigger
Jack pine string
15" 2219 with 125 grain spitfires
Hawke scope
TT single stage trigger
Re: Aluminum Arrows
you put insert in both ends.Then you have a threaded nock.Jeeper wrote:I've been shooting carbon sense I started cross bow hunting about eight years ago and when i got my micro i cut my quills down to 15" they are 357 grains i had decent groups at 60 but I didn't like the weight so i put brass incerts in and it made them a little better there about 398 grains. Then Cal from pine mountain sent me a few 15" 2219 i think they were around 420 grains and they would be touching at 60 yards .. So ill be switching to 2219 s in the future. My only problem is i like the threaded nocks on excal carbon but I haven't been able to find them for a 2219 anyone know who makes them? And i will have around nine quills for sell in a few weeks ..
Re: Aluminum Arrows
Yeah I thought about that .. I just wondered if someone made them. Thanks
Micro
Jack pine string
15" 2219 with 125 grain spitfires
Hawke scope
TT single stage trigger
Jack pine string
15" 2219 with 125 grain spitfires
Hawke scope
TT single stage trigger
Re: Aluminum Arrows
what I do to lose some weight off the tail end of my arrows, is I cut the nock/insert down to bout 1/4" long....instead of weighing 25gr, mine only weigh 7 gr ....which raised the FOC % of my arrows to help fly better....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
Re: Aluminum Arrows
The difference in the inside dia of a 2219 and a easton firebolt, quill is only .0035 smaller im sure they would probably stay in with enough glue and prob be fine for a knock sense its the back and you don't have to worry about tuning.
Micro
Jack pine string
15" 2219 with 125 grain spitfires
Hawke scope
TT single stage trigger
Jack pine string
15" 2219 with 125 grain spitfires
Hawke scope
TT single stage trigger
Re: Aluminum Arrows
I like alum arrows just for using hot melt to keep inserts in at both ends, when I bend an alum arrow it is way easier to get component's out to use again....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.