Cutting arrows w/o arrow saw?
Moderator: Excalibur Marketing Dude
Re: Cutting arrows w/o arrow saw?
Dremel tool with cut off disk, you will need a good method to keep it square.
It’s not the way you rock, it’s the way that you roll!
Re: Cutting arrows w/o arrow saw?
I use this mini bench top cut off saw from Harbor Freight for the rough cut and do a finish on them by polishing in a jig I made, could also use the G5 arrow squaring tool to finish them after cutting. I use the steel blade they included for aluminum arrows and bought some fiber cutoff wheels that fit it for doing carbon arrows. Be sure to have the vacuum running to get the dust when doing carbon.
http://www.harborfreight.com/power-tool ... 62136.html
http://www.harborfreight.com/power-tool ... 62136.html
2002 Exomag
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
-
- Posts: 4806
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Cutting arrows w/o arrow saw?
X2 on dremel tool w/ cut off wheel. Cut it a bit long, then use a disc sander to square and reach final length.
Re: Cutting arrows w/o arrow saw?
I take mine up to The Bow Shop and they cut them for me. I've not had any problems with that method.
________________
Sent from a mobile device - So spelling and grammar may be questionable!
---
"Team DryFire"
Vixen, Micro 315, HHA Optimizer, Boo & VixenMaster strings, Munch Mounts, Dr. Stirrup accessories.
Sent from a mobile device - So spelling and grammar may be questionable!
---
"Team DryFire"
Vixen, Micro 315, HHA Optimizer, Boo & VixenMaster strings, Munch Mounts, Dr. Stirrup accessories.
Re: Cutting arrows w/o arrow saw?
Dremel does it nicely then use an arrow squaring tool to finish off
Re: Cutting arrows w/o arrow saw?
Homemade arrow saw with a dremel
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!