Grizzly Done
Moderator: Excalibur Marketing Dude
Grizzly Done
My Grizzly is finally done. So far I added the BowJax to the string. I added shrink tubing and a BowJax to the arrow retainer. I wrapped the stirrup in rubber tape. I mounted the REDS. I added a camo cover on the scope. I refletched the Diablo arrows with Blazers using the Arizona Bolt. I added the Lumenoks.
Today my MM just arrived and I mounted it and my Kwikee 3 arrow quiver.( By the way Terry is a great guy and does nice work). I still have to shoot it some more and I want to chrono it.
I just wanted to say none, or almost none, of these mod idea's were my own. Most were found right here. Thanks !
Today my MM just arrived and I mounted it and my Kwikee 3 arrow quiver.( By the way Terry is a great guy and does nice work). I still have to shoot it some more and I want to chrono it.
I just wanted to say none, or almost none, of these mod idea's were my own. Most were found right here. Thanks !
Last edited by OldWolf on Thu Feb 02, 2017 4:40 pm, edited 1 time in total.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: Grizzly Done
Sweet looking,good job
MIcro 335 GEN 2
Widow Maker/ Undertaker
Nchunterkw Strings
Vixenmaster Slave Stringer
Cabelas Laser Stricker 11 Broadheads
Widow Maker/ Undertaker
Nchunterkw Strings
Vixenmaster Slave Stringer
Cabelas Laser Stricker 11 Broadheads
- way123hockey
- Posts: 475
- Joined: Wed Aug 06, 2014 1:46 pm
- Location: Simcoe County, Ontario
Re: Grizzly Done
Very nice.
Matrix 355 Blackout
Katana 385 BlackOps
Custom Black Vixen
Vixenmaster Strings
Munch Mounts
Wabi Calls
Katana 385 BlackOps
Custom Black Vixen
Vixenmaster Strings
Munch Mounts
Wabi Calls
-
- Posts: 4970
- Joined: Sun Nov 24, 2013 11:32 pm
- Location: Coquitlam, British Columbia
Re: Grizzly Done
Looks great! Enjoy the new toy!
Paul
Paul
You're only paranoid if everyone isn't out to get you.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
Re: Grizzly Done
Great looking bow!
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
Re: Grizzly Done
I'd probably hurt myself with the quiver sticking up in front of my face! LOL
Still lovin' my EXCALIBUR MICRO 355!
Re: Grizzly Done
Looks like mine.
BD400 w/ TT, HHA, Leupold 2-7x 33mm, 8ptbuk String, Munch Mount "Y", Kwikee-3SS, Dr Stirrup Kit
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
Re: Grizzly Done
Thanks for the compliments guys.
Now I have to get out and shoot it some more .. oh the burden !
I also want to chrono it as well. I'm figuring somewhere around 290 fps. I have the 418 grain Diablo's, 1 1/2 inch brace height and stock string.
Now I have to get out and shoot it some more .. oh the burden !
I also want to chrono it as well. I'm figuring somewhere around 290 fps. I have the 418 grain Diablo's, 1 1/2 inch brace height and stock string.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: Grizzly Done
OldWolf wrote:Thanks for the compliments guys.
Now I have to get out and shoot it some more .. oh the burden !
I also want to chrono it as well. I'm figuring somewhere around 290 fps. I have the 418 grain Diablo's, 1 1/2 inch brace height and stock string.
I'm getting 280 fps with a 420.8 grain zombie, and an 8ptbuk flemish string on my Grizzly.
BD400 w/ TT, HHA, Leupold 2-7x 33mm, 8ptbuk String, Munch Mount "Y", Kwikee-3SS, Dr Stirrup Kit
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
Re: Grizzly Done
I guess I'm shooting for 280 fps then !ThackMan wrote:I'm getting 280 fps with a 420.8 grain zombie, and an 8ptbuk flemish string on my Grizzly.
I think my rifle/pistol club might have a chrono I could use. I'll check into it and try to get it done next week.
ThackMan how about a picture of yours ?
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
- Carnivorous
- Posts: 3779
- Joined: Sun Dec 25, 2005 12:56 pm
- Location: Belleriver Ontario
Re: Grizzly Done
The old upgrade bug is upon you.
I have the same issue...lol
My Micro 315 upgrading is almost complete...
I have the same issue...lol
My Micro 315 upgrading is almost complete...
A touch of frost has heightened your awareness and your heart steadily beats in anticipation. Your senses are suddenly alert to the movement on the forest floor and you realize that the moment of truth is at hand.
Re: Grizzly Done
When you get her done you'll have to post some pictures.
Before I did any upgrades I did a lot of research .. mostly on here. I figured do it right the first time. All I wanted was a light weight,functional,relatively quiet,good looking and good shooting crossbow. I think I achieved that.
Before I did any upgrades I did a lot of research .. mostly on here. I figured do it right the first time. All I wanted was a light weight,functional,relatively quiet,good looking and good shooting crossbow. I think I achieved that.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: Grizzly Done
Thank you.xcaliber wrote:Looks real nice!
I have a stupid question. I've been out of the game for about 15 years due to an injury. I used to shoot and maintain my old Matthews Q2.
I've practiced, at home, using the rope cocker and no problems at all. I've also practiced using the stringing aid and again no problems.
My question is what if the string breaks ? If you adjust the stringing aid out to get it on the limbs and cock it using the rope cocker won't the distance from the limb tips be too far apart to get the string on ?
It's probably a simple method but I haven't figured it out. Thanks in advance !
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky