NuFletch lighted nocks

[PublicLandHunter1]

Recently bought from lighted nocks from NuFletch; when I got them in I put them on my BEE. I bent one and called NuFletch, they sent me out several replacements no charge. I guy I spoke with stated to take a small amount of string wax and coat the plastic insert to help with removal after the shot. Anyone using anything else to decrease surface friction? I thought about some sort of Teflon spray. Thanks in advance, Don

[bigbowman]

They will losen up after several shots. I never put anything on my nocks! Good luck!

[xcaliber]

X2

[robertyb]

What did you bend and how did you manage to bend it?

[catclr]

The first ones I bought last year were tight, but used some fine grit sandpaper and fixed them from being tight.
If you bent the plastic nock, how did you do that?

[PublicLandHunter1]

Sorry or the delay in responding. I bent the plastic housing by pulling it out of the bolt and twisting at the same time. I have applied a small amount of serving wax and now they come out easy.