Bitzenberger Jig and the Installation of the XB Receiver

[amythntr]

Anthony, bring all of your Bolt and fletching stuff to Boofest
and myself or someone will help you out.

....before or after the 3D shoot?

Anthony


PS: thank you kindly!

[xcaliber]

Hopefully before! You best have your fine tuned stuff, you'll need it.

[amythntr]

Hopefully before! You best have your fine tuned stuff, you'll need it.

....Dan, I might have to bring, "Vin the Chin" with me to Boofest...He never misses at anything...and if he does, he just would walk over to the target and move his shot...and for some reason NOBODY says anything....faggettaboutit!

Anthony

[xcaliber]

I think I met him once, or twice.

[strum]

Anthony yer a dork!!!!
hehehe just kidding hang in there your doing fine.

[amythntr]

....I accept the dork status....but mi famiglia, now that's a different story

Anthony

[amythntr]

....finally got my springs, ball bearings and set screws from Bitz...my son Chris figured out how it all goes back....makes so much sense now...got my crossbow receiver in....

....so I placed one of my completed arrows , with Ignitors into the receiver just to see if it all works fine....guess what...the nock portion of the Ignitor turns inside the shaft of the arra and it still does not work....

.....I think I know what my solution is going to be....I ordered the nock extender from Carbon Express....when it comes in I will put the original receiver back in and use it with the Carbon Express nock extender and be done with it...

.....I know the AZBor the Bohning Tower Fletch is the way to go....I do use the AZB but for some reason I like the Bitz better....


Anthony

[paulaboutform]

....finally got my springs, ball bearings and set screws from Bitz...my son Chris figured out how it all goes back....makes so much sense now...got my crossbow receiver in....

....so I placed one of my completed arrows , with Ignitors into the receiver just to see if it all works fine....guess what...the nock portion of the Ignitor turns inside the shaft of the arra and it still does not work....

.....I think I know what my solution is going to be....I ordered the nock extender from Carbon Express....when it comes in I will put the original receiver back in and use it with the Carbon Express nock extender and be done with it...

.....I know the AZBor the Bohning Tower Fletch is the way to go....I do use the AZB but for some reason I like the Bitz better....

Fratello, you're talking to a big fan of the bitz, but.....come Boofest Munch will be delivering a second bolt fletcher I bought from another member and we'll figure it out together. And what I mean is that I can't see not loving that thing when it's working properly. Looking forward to it paisan.
....btw, say hi to my cousin Vinny.

Anthony

[amythntr]

....finally got my springs, ball bearings and set screws from Bitz...my son Chris figured out how it all goes back....makes so much sense now...got my crossbow receiver in....

....so I placed one of my completed arrows , with Ignitors into the receiver just to see if it all works fine....guess what...the nock portion of the Ignitor turns inside the shaft of the arra and it still does not work....

.....I think I know what my solution is going to be....I ordered the nock extender from Carbon Express....when it comes in I will put the original receiver back in and use it with the Carbon Express nock extender and be done with it...

.....I know the AZBor the Bohning Tower Fletch is the way to go....I do use the AZB but for some reason I like the Bitz better....

Fratello, you're talking to a big fan of the bitz, but.....come Boofest Munch will be delivering a second bolt fletcher I bought from another member and we'll figure it out together. And what I mean is that I can't see not loving that thing when it's working properly. Looking forward to it paisan.
....btw, say hi to my cousin Vinny.

Anthony

....sounds good and will do Paul!

Anthony