This is my first custom made bolt. I sure hope at least one out of the six will fly good.
18" Gold Tip Laser II (brass insert)
2" Bohning Blazer Broadhead vanes
85 grain Montec G5
http://i7.photobucket.com/albums/y267/M ... ure065.jpg
New Bolt
Moderator: Excalibur Marketing Dude
Thanks. I'll give an update on performance later.
Just did a FOC and with the 85 grain head = 14.2%
and with the 125 grain head= 16.8%
I'll try both. If the 125 grain performs as well as the 85 I might just go with it. Who knows theyll probably be close.
Just did a FOC and with the 85 grain head = 14.2%
and with the 125 grain head= 16.8%
I'll try both. If the 125 grain performs as well as the 85 I might just go with it. Who knows theyll probably be close.
Life Is Too Short !!! Live For The Moment !!!
Thanks. This is kinda fun and becoming a little easier because of that practice thing This is my last bolt done in white vanes.
http://i7.photobucket.com/albums/y267/M ... ure066.jpg
85 grain = about 365 total grains
125 grain = about 405 total grains
from Phoenix.
http://i7.photobucket.com/albums/y267/M ... ure066.jpg
85 grain = about 365 total grains
125 grain = about 405 total grains
from Phoenix.
Life Is Too Short !!! Live For The Moment !!!
arrowsHi Yall! Been browsing these pages
Hi yall, Been browsing these pages for awhile No way do I have the experience you guys do but... To make alongf story short I got a dozewn arrows from D. Miller in Sardis, Oh. Not what came w/ "Right Stuff" but rather LII's w/ brass inserts and advice to use SLICK TRICKS. I did so reluctantly, because I thought the stuff that came w/ bow was the best. and thesae only had 4" fletch. Tried them @ 30 yds., and to my delighted amazement, I could shoot a FT, retrieve it, install 100gr. ST and one of the four blades touched the hole the FT made, I've got a well chewed up "Block" target, w/ [9] 2" circles painted on back, almost all are "in there" Just wanted to share....Awshucks [Exomax]
"Eze 18:21"
Yes I sure did. I will try and scan them on the copier and then email them to you if you. I talked to Bernie friday from Bitzenburger and he was very knowledgeable and friendly. He explained a few thing to me and gave a couple of tips...great guy.
I just noticed on the back of the literature there is 8 different nock receivers. I wonder if I have the right one for my straight clamp ? I might just go ahead and get the crossbow receiver nock because I noticed my rigged up nock might not be correctly aligned
I just noticed on the back of the literature there is 8 different nock receivers. I wonder if I have the right one for my straight clamp ? I might just go ahead and get the crossbow receiver nock because I noticed my rigged up nock might not be correctly aligned
Life Is Too Short !!! Live For The Moment !!!
-
- Posts: 1728
- Joined: Fri Dec 31, 2004 4:34 pm
- Location: Western Penna.