Half moon drivers

frydaddy · Post by **frydaddy** » Tue Aug 26, 2008 10:17 pm

Are half moon drivers ok to us with my excalibur?

wabi · Post by **wabi** » Tue Aug 26, 2008 11:01 pm

Half Moon Nocks are not recommended for the Excaliburs. They are not necessary with Excalibur's string release (top latching claws) and the chance of a dry-fire condition caused by mis-orientation of a half moon nock is always a possibility.

dick195252 · Post by **dick195252** » Wed Aug 27, 2008 1:47 am

I would stick with the Flat nocks

frydaddy · Post by **frydaddy** » Wed Aug 27, 2008 7:42 am

Thanks guys for your help. Walmart has good deal on some
bolts that's why i ask. They have moon nocks , so i figured i would
check and see what yall said.

frydaddy

Rich · Post by **Rich** » Wed Aug 27, 2008 7:58 am

If it's a good deal, buy them and pull out the halfmoon and replace with flat nocks or inserts.

Rich

frydaddy · Post by **frydaddy** » Wed Aug 27, 2008 10:15 am

I am, to good of deal. Will keep me in bolts for years.

Excalibur Crossbow Forum

Half moon drivers

Half moon drivers

Thanks guys

Deal