Making of a wood stock Stage 3
Moderator: Excalibur Marketing Dude
-
- Posts: 4788
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Making of a wood stock Stage 3
Trying to make a cheek rest.
Trying my hand at making a cheek rest.
Trying my hand at making a cheek rest.
-
- Posts: 481
- Joined: Sat Jul 11, 2009 12:01 am
- Location: Lebanon, NJ
looking very nice. my piece of curly maple should be coming soon. what tools are you using for the main carving and rough sanding, have you ever used a pneumatic sander? they work great for really quick rough sanding and then you can do really fine sanding faster than any orbital or palm sander.
here are some of the pics of that piece i ordered: 2"x7"x 41-3/4"
[/list]
here are some of the pics of that piece i ordered: 2"x7"x 41-3/4"
[/list]
Excalibur Equinox
Lumi-Zone
Viper-X- Strings
NGSS (newguy)
vortex pro extreme 125
Lumi-Zone
Viper-X- Strings
NGSS (newguy)
vortex pro extreme 125
-
- Posts: 4788
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
I'm using a portable grinder with a 24 grit on it. It takes it off fast. Have to take care when doing it. I will use processively finer grit to get what I want. A dremel tool really works nice for finer wood removal like in the trigger hole. I never got into air tools but heard their great. Can not see why they would'nt work. You got a nice lookin piece there. GREAT grain.
Last edited by agingcrossbower on Mon Sep 14, 2009 10:56 pm, edited 1 time in total.
-
- Posts: 4788
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
-
- Posts: 3084
- Joined: Sat Aug 04, 2007 1:57 am
- Location: McEwen Tennessee
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
I've built a couple of flintlocks in the past made of tiger stripe maple and that is one fine piece of maple... It would have made a fine gunstock, and now it'll make a fine crossbow stock... Just keep your tools sharp...That maple grain needs to be cut clean.....Good luck with the project I'm sure it'll come out great!!
-
- Posts: 6989
- Joined: Thu Oct 19, 2006 12:16 pm
-
- Posts: 4788
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.