Making of a wood stock Stage 4
Moderator: Excalibur Marketing Dude
-
- Posts: 4790
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Making of a wood stock Stage 4
Just made a big hole and had to share. Nerve racking
-
- Posts: 617
- Joined: Mon Dec 22, 2008 6:28 am
- Location: Wv
-
- Posts: 4790
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Did I mention there are 6000 stages to this puppy and I am on stage 4. It is a long process but I am loven it.
Hoss wrote:I like that LMAO mine needs a 4 leaf clover....Hey looking good agingcrossbower I cant wait to see the finished product..very nice..Dereck wrote:Unusual Thumb hole looks like a four leaf clover is that for luck.''
-
- Posts: 4790
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
-
- Posts: 4790
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
-
- Posts: 4790
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
I believe I got the idea from Bojangles. He used a hand held grinder with a sanding disc on it. I used the 24 grit and believe me it takes it off fast. Sometimes to fast. You have to take the guard off to make it work well and yes there will be blood if it touches you. So be always aware of where it is. With these posts I was hoping I would get others to at least to give stock making a try. Take your time and it really is'nt that hard.
Dereck wrote:You said you were using a grinder for shaping the stock.I think it might be something I could even try without the risk of maiming myself.
Will see if I have the time and courage to attempt it for now will live vicariously through you.
Do yourself a favor and get some Microplane woodworking rasps:
http://us.microplane.com/index.asp?Page ... Category=4
You can buy them online or at any Woodcrafters store. They're awesome for carving stocks! Take wood off as rapidly as a traditional wood rasp, but with a much smoother finish than a traditional rasp.
Then finish with cabinet scrapers, also from Woodcrafters.
With these two hand tools you can avoid the dust problems of power tools and sandpaper. Power tools also inevitably will cause you to take off more wood than you intended!
http://us.microplane.com/index.asp?Page ... Category=4
You can buy them online or at any Woodcrafters store. They're awesome for carving stocks! Take wood off as rapidly as a traditional wood rasp, but with a much smoother finish than a traditional rasp.
Then finish with cabinet scrapers, also from Woodcrafters.
With these two hand tools you can avoid the dust problems of power tools and sandpaper. Power tools also inevitably will cause you to take off more wood than you intended!
-
- Posts: 4790
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
You guys are something else. I just got a large rough rasp. It works great but I needed something smaller a definitely something that makes smoother removal of wood. I was ready to make the 45 miles trek to my favorate store and Nchunter comes up with the answer. Is someone watching me. Thanks Nchunter, and great timing.
nchunter wrote:Do yourself a favor and get some Microplane woodworking rasps:
http://us.microplane.com/index.asp?Page ... Category=4
You can buy them online or at any Woodcrafters store. They're awesome for carving stocks! Take wood off as rapidly as a traditional wood rasp, but with a much smoother finish than a traditional rasp.
Then finish with cabinet scrapers, also from Woodcrafters.
With these two hand tools you can avoid the dust problems of power tools and sandpaper. Power tools also inevitably will cause you to take off more wood than you intended!
-
- Posts: 3084
- Joined: Sat Aug 04, 2007 1:57 am
- Location: McEwen Tennessee