Hi I just bought Carbon express Bolts with the V knocks on then and I can't get them to group very well.
Should Excalibur Bows use flat knocks or does it matter?
Equinox Accuracy
Moderator: Excalibur Marketing Dude
-
- Posts: 19
- Joined: Sun May 17, 2009 9:21 pm
You did say Equinox? I also have an Equinox and was having problems with my firebolts and boltcutter broadheads. I did two things:
1st - I refletched the firebolts with 2" blazers and rt helix twist. Using the boltcutters I got a group of 1 1/2" at 40 yards. Big improvement from a 5" group.
2nd- I bought Gold Tip Pro Laser II bolts and some 125 Slick Trick broadheads and also fletched them with 2" blazers with rt helix. I got a group of about 1" at 50 yards. Pretty Impressive.
I should also mention that I shoot a custom made Boo string or one of the Fast Flight Flemish strings with a STS at all times.
Try this, it should help.
1st - I refletched the firebolts with 2" blazers and rt helix twist. Using the boltcutters I got a group of 1 1/2" at 40 yards. Big improvement from a 5" group.
2nd- I bought Gold Tip Pro Laser II bolts and some 125 Slick Trick broadheads and also fletched them with 2" blazers with rt helix. I got a group of about 1" at 50 yards. Pretty Impressive.
I should also mention that I shoot a custom made Boo string or one of the Fast Flight Flemish strings with a STS at all times.
Try this, it should help.
-
- Posts: 5250
- Joined: Wed May 24, 2006 10:21 pm
- Location: Virginia
- Contact:
-
- Posts: 3084
- Joined: Sat Aug 04, 2007 1:57 am
- Location: McEwen Tennessee
hi & welcome to the club l've used v-knocks as well & found that they shoot high & seem to get thrown insted of being pushed if that makes any sence from were my sights were setup for firebolts using flat knocks, so l went back to flat knocks & problem was solved. best regards frank
JUST FIGHTING TO SURVIVE..