Because I've never done this, when you unstring your bow do you just take off the disappators on the outside of the limbs or the ones closer to the centre too?
Mike
Unstringing
Moderator: Excalibur Marketing Dude
-
CDN Taxman
- Posts: 210
- Joined: Tue Oct 14, 2008 7:49 pm
- Location: Waterloo Region
Unstringing
2008 Excalibur Equinox
Groundpounder Mount
NGSS
_________________________________
1992 PSE Edge 5050 Compound Bow
Groundpounder Mount
NGSS
_________________________________
1992 PSE Edge 5050 Compound Bow
Re: Unstringing
just the pads on the outside with the 2 allen key bolts in them. everything else stays in place
-
Doe Master
- Site Admin
- Posts: 4739
- Joined: Sun Jun 25, 2006 7:57 am
- Location: Baden , Ontario
Re: Unstringing
Yes just take the two screws per pad out and then remove the pad before unstringing . This will save the pads which are a soft rubber from skwishing out .
Skwish is a technical term.
Skwish is a technical term.
Prone est ut nos es plurimus periculosus
Re: Unstringing
I got warned once by Danny those diss pads have alum backs w/ steel screws going in them, easy to strip, pita even w/ free replacemnts. Left Emax strung 3 yrs w/ no loss in speed, fwiw.
"Eze 18:21"
-
Doe Master
- Site Admin
- Posts: 4739
- Joined: Sun Jun 25, 2006 7:57 am
- Location: Baden , Ontario
Re: Unstringing
They no longer are aluminum ,they are steel now . Prone est ut nos es plurimus periculosus
-
CDN Taxman
- Posts: 210
- Joined: Tue Oct 14, 2008 7:49 pm
- Location: Waterloo Region
Re: Unstringing
Thanks guys! Easy once you know what you're doing!
Mike
Mike
2008 Excalibur Equinox
Groundpounder Mount
NGSS
_________________________________
1992 PSE Edge 5050 Compound Bow
Groundpounder Mount
NGSS
_________________________________
1992 PSE Edge 5050 Compound Bow