Greetings,and a Question?
Moderator: Excalibur Marketing Dude
-
- Posts: 68
- Joined: Thu Jul 28, 2011 8:52 am
- Location: North East Pennsylvania
Greetings,and a Question?
Im coming into the Crossbow fold,after more than 40 years shooting a compound.Getting up in age,my shoulders are giving me problems.I have a Equinox Lite Stuff package,due to be delivered TODAY! (NICE) Iv been making Arrows and String's for the Vertical Bow ,for quite a few years,but I have a question on the Bolt Insert on the Nock end.Iv read in a Post,that it is not a good idea,to use a Point Insert,on the Nock End!
I just completed making up a dozen Easton Power Bolts,and was forced to use the Point insert,for the Nock insert.....because I can not find anything especially made for the Power Bolt Nock End.Could one of you fine people, enlighten me,as to what Im looking for,and where to go to get a visual peek at the Critter?Many Thanks!,and what a Great Board to read through!
Thanks Again!
I just completed making up a dozen Easton Power Bolts,and was forced to use the Point insert,for the Nock insert.....because I can not find anything especially made for the Power Bolt Nock End.Could one of you fine people, enlighten me,as to what Im looking for,and where to go to get a visual peek at the Critter?Many Thanks!,and what a Great Board to read through!
Thanks Again!
Excalibur Equinox
GT Laser III
Hawke XB-30
Slick Tricks
UTG Law Inforcement Rings
Munch Mount
GT Laser III
Hawke XB-30
Slick Tricks
UTG Law Inforcement Rings
Munch Mount
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Greetings,and a Question?
I haven't looked fer a nokend to that arrow shaft. Nothing wrong with using front inserts. Just cut it down to 5/16" or 3/8" & bevel the the edge so it won't abraid yer string serving
-
- Posts: 410
- Joined: Sat May 14, 2011 10:27 am
- Location: eastern kentucky us
Re: Greetings,and a Question?
welcome to the site and you will love your equinox plenty of power and a tack driver.
Re: Greetings,and a Question?
Welcome to the forum
Lots of good ppl here to help you
Lots of good ppl here to help you
-
- Posts: 4805
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Greetings,and a Question?
I think Wyvern Creations has those nock type inserts for Easton shafts.
-
- Posts: 68
- Joined: Thu Jul 28, 2011 8:52 am
- Location: North East Pennsylvania
Re: Greetings,and a Question?
Thank you very much!That looks like the one im after.
Excalibur Equinox
GT Laser III
Hawke XB-30
Slick Tricks
UTG Law Inforcement Rings
Munch Mount
GT Laser III
Hawke XB-30
Slick Tricks
UTG Law Inforcement Rings
Munch Mount
Re: Greetings,and a Question?
welcome to the forum
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
-
- Posts: 2856
- Joined: Mon Oct 25, 2010 9:02 pm
- Location: S.E. Georgia
- Contact:
Re: Greetings,and a Question?
Welcome to the forum!!!!
Congrats on your nox...aka "the beast"
Congrats on your nox...aka "the beast"
Bulldog m380 blackout
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
-
- Posts: 68
- Joined: Thu Jul 28, 2011 8:52 am
- Location: North East Pennsylvania
Re: Greetings,and a Question?
Thanks Guy's! This is an awesome site.Iv been reading everything I can get my Mouse on,most of the day! So much knowledge here,it's a virtual Treasure Trove.
Excalibur Equinox
GT Laser III
Hawke XB-30
Slick Tricks
UTG Law Inforcement Rings
Munch Mount
GT Laser III
Hawke XB-30
Slick Tricks
UTG Law Inforcement Rings
Munch Mount
- Limbs and Sticks
- Posts: 3206
- Joined: Mon Sep 01, 2008 7:13 pm
- Location: Colonial Beach, Virginia, US
Re: Greetings,and a Question?
Welcome aboard, have fun, shoot safe
Wes
Wes
"Maxine"
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
-
- Posts: 442
- Joined: Sun Feb 06, 2011 7:02 pm
- Location: Northern B.C.
Re: Greetings,and a Question?
Welcome to the forum! Yes it is good reading, some very smart ppl on here and you will have a hard time stumping these guys.
Bill
Bill
Life is good, treat with respect and honour!
- onebigskittle
- Posts: 2041
- Joined: Tue Sep 21, 2010 1:08 am
- Location: Keysville Virginia
Re: Greetings,and a Question?
Welcome to the forum and congrats on your new Excal!!
Sounds like you found what yer lookin' for but if not front inserts will work fine as nocks but as mentioned just check them for sharp edges.
Sounds like you found what yer lookin' for but if not front inserts will work fine as nocks but as mentioned just check them for sharp edges.
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
-
- Posts: 553
- Joined: Sat Feb 26, 2011 12:00 pm
- Location: pontiac region quebec canada
Re: Greetings,and a Question?
wellcome to the forum .have some fun with your excalibur and be safe
Denis
Denis
excalibur equinox
standard excel string
vari-zone scope
excalibur carbon arrows
3 lunenok excalibur carbon arrows
s5 string chock
range finder mount
standard excel string
vari-zone scope
excalibur carbon arrows
3 lunenok excalibur carbon arrows
s5 string chock
range finder mount