20" or 22" Bolts

Crossbow Hunting

Moderator: Excalibur Marketing Dude

User avatar
nchunterkw
Posts: 2904
Joined: Sat Dec 24, 2011 11:21 am
Location: Wake Forest, NC
Contact:

20" or 22" Bolts

Post by nchunterkw »

Is there any advantage to shooting 22" bolts vs. the 20" bolts. 20" seems to be the popular choice.
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16

Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
User avatar
Boo
Posts: 14322
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: 20" or 22" Bolts

Post by Boo »

According to Excalibur there is no difference. I cut my 20" shafts down a bit.
Some people just like stepping on rakes
User avatar
nchunterkw
Posts: 2904
Joined: Sat Dec 24, 2011 11:21 am
Location: Wake Forest, NC
Contact:

Re: 20" or 22" Bolts

Post by nchunterkw »

Do you cut them for speed? I was wondering if a 22" bolt would stabilize faster because the fletches are farther from the BH.
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16

Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Bowster
Posts: 269
Joined: Mon May 01, 2006 8:57 pm
Location: Kitchener Ontario

Re: 20" or 22" Bolts

Post by Bowster »

I was thinking about trying 22 inch shafts as well. Thinking the length may allow for an increased FOC and better stabilization with 100 grain broadheads.

Someone on here must have tested this.....
If the thrill of the hunt is lost, then I have lost.

Phoenix - Varizone Scope - Custom GT Laser II - 100 grain Slicks / brass inserts - Boo string

PSE Axe 6 - Axcel Sight - QAD Rest - TruBall S1 Release
gerald strine
Posts: 3425
Joined: Mon Nov 30, 2009 7:41 pm
Location: Southern Michigan

Re: 20" or 22" Bolts

Post by gerald strine »

I am going to try longer bolts next season for safety reasons.
I shoot an equinox and the 20 inch bolts do not obstruct the sturip area and allow you to put your foot in the struip while their is a bolt in place .
I almost put a bolt through my foot uncocking my bow while loaded :oops: .
Very stupid on my part but it happened and I want longer bolts so I can not get the chance to make the same mistake again.
I am looking for some 22 inch carbon blank shafts any suggestions ?
As far as other advantages the longer bolts they are supposed to be more stable in flight,do not shed energy as fast,and will somewhat reduce noise and vibration.
Hunt eat sleep repeat.
User avatar
Boo
Posts: 14322
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: 20" or 22" Bolts

Post by Boo »

Having a longer shaft weakens the spine so there some give and take there. So I don't see any advantage.
Ask truly competitive shooters what length they use. Then ask what the really productive hunters what they use. They all use 20" arrows. The difference between 20" and 22" arrows is a moot point. It isn't going to make a difference when killing game.
I cut down my arrows to lose weight and gain speed with no loss in hunting accuracy.
Gerald, try Carbon Express Maxima Hunters if you want to try 22" arrows.
Experimenting is definitely the key here to see what makes you happy.
Some people just like stepping on rakes
gerald strine
Posts: 3425
Joined: Mon Nov 30, 2009 7:41 pm
Location: Southern Michigan

Re: 20" or 22" Bolts

Post by gerald strine »

Can you get the Maxima hunters as a bare shaft or only as a finished bolt ?
Hunt eat sleep repeat.
User avatar
Boo
Posts: 14322
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: 20" or 22" Bolts

Post by Boo »

gerald strine wrote:Can you get the Maxima hunters as a bare shaft or only as a finished bolt ?
They are only available as complete arrows. David Wilkins at Wyvern Creations is where I've been buying from. You can specify Blazer Vanes. Cut from the rear if you are going shorter. Don't be afraid of the plastic rear nocks, I've never had an issue with them.
Some people just like stepping on rakes
User avatar
Boo
Posts: 14322
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: 20" or 22" Bolts

Post by Boo »

deleted
Some people just like stepping on rakes
hikerman
Posts: 923
Joined: Sun Oct 09, 2005 5:48 pm
Location: Orangeville

Re: 20" or 22" Bolts

Post by hikerman »

I have shot both, no noticable improvement. With 2219-22", 125g BH and brass inserts I was up to 588g.

With 2219 the 22" give you about 20 g more than the 20".
Exocet 175#
Easton, 2216
2"vanes
G5 Montech 125g.
Boo String.
gerald strine
Posts: 3425
Joined: Mon Nov 30, 2009 7:41 pm
Location: Southern Michigan

Re: 20" or 22" Bolts

Post by gerald strine »

Boo wrote:
gerald strine wrote:Can you get the Maxima hunters as a bare shaft or only as a finished bolt ?
They are only available as complete arrows. David Wilkins at Wyvern Creations is where I've been buying from. You can specify Blazer Vanes. Cut from the rear if you are going shorter. Don't be afraid of the plastic rear nocks, I've never had an issue with them.
Hey Boo is a Luminock an option with these?
Hunt eat sleep repeat.
User avatar
Boo
Posts: 14322
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: 20" or 22" Bolts

Post by Boo »

gerald strine wrote:
Boo wrote:
gerald strine wrote:Can you get the Maxima hunters as a bare shaft or only as a finished bolt ?
They are only available as complete arrows. David Wilkins at Wyvern Creations is where I've been buying from. You can specify Blazer Vanes. Cut from the rear if you are going shorter. Don't be afraid of the plastic rear nocks, I've never had an issue with them.
Hey Boo is a Luminock an option with these?
Nope
Some people just like stepping on rakes
vixenmaster
Posts: 13618
Joined: Wed Sep 14, 2005 3:51 pm
Location: Western Ky

Re: 20" or 22" Bolts

Post by vixenmaster »

I have tried 2219 as long as 26" out of a Phoenix i had & my Vixen. I really couldn't see any better accuracy than they were at 20". Just was tinkering back then. Now all i do is shoot diff kinds of Tick Toters. At the yardage i shoot them i don't have a junk arrow that isn't min of kill out to 40 yds wid a fixed bladed BH! :D
Half Bubble Off BD360

[email protected] 417-505-9315
User avatar
Boo
Posts: 14322
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: 20" or 22" Bolts

Post by Boo »

BeerNutz1960 wrote:Now all i do is shoot diff kinds of Tick Toters.

Okay I'll bite, and it will likely be evident that I'm a novice, but what the hell is a Tick Toter?? :? Is it a reference to garbage arrows?? :)
That is Hillbilly for whitetail deer :mrgreen:
Some people just like stepping on rakes
sumner4991
Posts: 6989
Joined: Thu Oct 19, 2006 12:16 pm

Re: 20" or 22" Bolts

Post by sumner4991 »

Boo wrote:
BeerNutz1960 wrote:Now all i do is shoot diff kinds of Tick Toters.

Okay I'll bite, and it will likely be evident that I'm a novice, but what the hell is a Tick Toter?? :? Is it a reference to garbage arrows?? :)
That is Hillbilly for whitetail deer :mrgreen:
It can be a deer, hog, squirrel, rabbit . . .anything that might have a tick attached. :lol: It's best to use tick repellent when in the woods. :shock:
I'd rather wear out than rust out.
Perception trumps intention.

2006 Exomax w/Agingcrossbower Custom Stock
20" Easton Powerbolts w/125gr Trophy Ridge Stricknines & 2"Blazers
Boo Custom Strings
2006 Vixen
Post Reply