new to crossbows; I just bought the vortex, regular string ,shadowzone scope,
no bolts. i've always fletched my own verticle arrows, was wondering if an easy fletch straight one degree would work on 2219xx,2216xx and if so what size vanes (recomendations) reasons for these is I have quite a few of these arrows. also for flat nock would plastic eastmans work? have a bunch of alluminum
inserts and trophy ridge steelheads 100gr need advice thanks
bolt ?s
Moderator: Excalibur Marketing Dude
Re: bolt ?s
Welcome!
I suggest purchasing "the Bolt" replacement arms for you EZ fletch (under $15). The one degree arms you have are "OK", but the "Bolt" arms have the perfect offset for the arrows we use. Yes, we call them arrows. The "bolt" EZ and 2" Blazers will give you you best flight characteristics in my opinion. Either the Eastman plastic or aluminum inserts will work as a rear flat nock.
I suggest purchasing "the Bolt" replacement arms for you EZ fletch (under $15). The one degree arms you have are "OK", but the "Bolt" arms have the perfect offset for the arrows we use. Yes, we call them arrows. The "bolt" EZ and 2" Blazers will give you you best flight characteristics in my opinion. Either the Eastman plastic or aluminum inserts will work as a rear flat nock.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
-
vixenmaster
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: bolt ?s
X2 on above post, yup you can cut off alum. inserts & use them fer back nock. Just chamfer the edge on them. Steelheads are good mech. used them fer a few yrs myself
Re: bolt ?s
thanks for tthe advice! just got my votex today, can't wait to launch a few
''arrows''(excited). I think i will get the bolt head as suggested for my e-z fletch
2'' vanes, in the mean time I will fletch a few with 1 degree straight and see
what happens (4'' vanes). I will keep ya posted!!!
''arrows''(excited). I think i will get the bolt head as suggested for my e-z fletch
2'' vanes, in the mean time I will fletch a few with 1 degree straight and see
what happens (4'' vanes). I will keep ya posted!!!
better an overkill than an underkill
vortex,vixenmaster string
2219s, abc steel sonics
Do not resent growing old. Many are denied the privilege.
vortex,vixenmaster string
2219s, abc steel sonics
Do not resent growing old. Many are denied the privilege.
Re: bolt ?s
update! fletched three 2219 arrows with 70 grain brass insert 4 inch fletchings with the one degree straight easy fletch tool and 100 grain field tips; this is insane every shot in a one inch circle out to 30 yards and winds are 20 to 30 mph. will shoot futher at camp. Any fixed BH suggestions reasonably priced?
thanks
thanks
better an overkill than an underkill
vortex,vixenmaster string
2219s, abc steel sonics
Do not resent growing old. Many are denied the privilege.
vortex,vixenmaster string
2219s, abc steel sonics
Do not resent growing old. Many are denied the privilege.
-
vixenmaster
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: bolt ?s
Slick Tricks, i preferr the RazorTrick modelmbc4 wrote:update! fletched three 2219 arrows with 70 grain brass insert 4 inch fletchings with the one degree straight easy fletch tool and 100 grain field tips; this is insane every shot in a one inch circle out to 30 yards and winds are 20 to 30 mph. will shoot futher at camp. Any fixed BH suggestions reasonably priced?
thanks