blazer vanes

[magic bow]

Ive never fletched any crossbow bolts yet iwas wondering what kind of off set or helcial was most guys puttin on with the blazers?

[wheelie]

Ive never fletched any crossbow bolts yet iwas wondering what kind of off set or helcial was most guys puttin on with the blazers?

3 degrees RH helix, I use the Bohning Archery jig that was made for the blazers. Works good and arrows fly well for all my archery equipment. One falls off I can get it exact spot to just add one new one instead of having to replace all three blazers.

[j.krug]

I use the EZ Fletch Bolt to put Blazers on my arrows. It doesn't say what degree of helical it is, only that it is a "radical" helical. This little jig works great and you can also replace 1 vane only if need be by slipping the 2 empty arms over the existing vanes to locate the new single vane.

[Cossack]

x2

[vixenmaster]

I use the radical helical with the Bolt jig, i est. it as about 8 dergees +/- area. Most are from 2 to 4 degrees offset or 4-6 degrees helical

[papa bear1]

I use the EZ Fletch Bolt to put Blazers on my arrows. It doesn't say what degree of helical it is, only that it is a "radical" helical. This little jig works great and you can also replace 1 vane only if need be by slipping the 2 empty arms over the existing vanes to locate the new single vane.

X 3 I believe it's 6 degrees. someone will correct me if i'm wrong.

Dave

[diesel]

I use the EZ Fletch Bolt to put Blazers on my arrows. It doesn't say what degree of helical it is, only that it is a "radical" helical. This little jig works great and you can also replace 1 vane only if need be by slipping the 2 empty arms over the existing vanes to locate the new single vane.

X3 Works great for the blazers

[joe171]

I use the EZ Fletch Bolt to put Blazers on my arrows. It doesn't say what degree of helical it is, only that it is a "radical" helical. This little jig works great and you can also replace 1 vane only if need be by slipping the 2 empty arms over the existing vanes to locate the new single vane.

X3 Works great for the blazers

X`s 4..............just bought it I like still have a dozed to strip and refletch lol

[Ont_Excal]

I use an old Jojan multifletcher with a right helical up to 11 degrees. I have it set at about half way is the best way I can describe it. That worked very well for my vertical bow and I see no need to change.

Blazer vanes are definitely the way to go!!

[Mark Rainbolt]

X 3 I believe it's 6 degrees. someone will correct me if i'm wrong.

Dave

The EZ Bolt has a 3 degree, I was curious about that so I called the company.
God Bless,
Mark

[papa bear1]

X 3 I believe it's 6 degrees. someone will correct me if i'm wrong.

Dave

The EZ Bolt has a 3 degree, I was curious about that so I called the company.
God Bless,
Mark

Thank you Mark, I am actualy going to BP today, to purchase one, and some Blazer vanes, and refleching all my arrows, then i will sight in again,

Dave

P.S. Don't know where i came up whith 6 degrees....