Felt bob and polish for latch?
Moderator: Excalibur Marketing Dude
Felt bob and polish for latch?
.
After polishing my latch with high grit papers should I do a finish polish with a felt-bob, some Flitz and a high speed rotary tool?
Would this be overkill or a good step to do?
Thanks,
John
After polishing my latch with high grit papers should I do a finish polish with a felt-bob, some Flitz and a high speed rotary tool?
Would this be overkill or a good step to do?
Thanks,
John
Re: Felt bob and polish for latch?
I just polished mine with some paracord with some honing compound from lee valley I had for my knives. Worked great.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: Felt bob and polish for latch?
The surfaces can not be too highly polished. I can see the cracks in my teeth in mine and it functions WONDERFULLYJT of PA wrote:.
After polishing my latch with high grit papers should I do a finish polish with a felt-bob, some Flitz and a high speed rotary tool?
Would this be overkill or a good step to do?
Thanks,
John
[Just be sure you polish the right things in the right manner ]
Re: Felt bob and polish for latch?
Mine are just as shiny mirror like I can see Tinks teeth in them too !TheTinker wrote:The surfaces can not be too highly polished. I can see the cracks in my teeth in mine and it functions WONDERFULLYJT of PA wrote:.
After polishing my latch with high grit papers should I do a finish polish with a felt-bob, some Flitz and a high speed rotary tool?
Would this be overkill or a good step to do?
Thanks,
John
[Just be sure you polish the right things in the right manner ]
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: Felt bob and polish for latch?
Sounds like yours are "telescope shiny" to me..newbie wrote:Mine are just as shiny mirror like I can see Tinks teeth in them too !
Re: Felt bob and polish for latch?
My latch was eating my serving pretty good so I used some autosol and a hockey skate lace and polished it up. Nice and smooth, no more eaten serving
Re: Felt bob and polish for latch?
.
http://boocustomstrings.com/importantstuff.html
The above link is to Boo's site. Once there, scroll down to the Repair of Rough Latches That Eat Servings section.
The picture there shows the crossbow in one piece ... it appears you can polish the latches on your crossbow without taking it apart.
Hope this helps.
All the best,
John
.
http://boocustomstrings.com/importantstuff.html
The above link is to Boo's site. Once there, scroll down to the Repair of Rough Latches That Eat Servings section.
The picture there shows the crossbow in one piece ... it appears you can polish the latches on your crossbow without taking it apart.
Hope this helps.
All the best,
John
.
Re: Felt bob and polish for latch?
I was looking at that brand also. I look forward to hearing how it works for you. Hopefully, we'll both have some SMOOOOTH latches soon.
I tried "shooting smooth" my latches, but after 1,000 shots my right latch hook is still tearing up my serving. No more !!!
I tried "shooting smooth" my latches, but after 1,000 shots my right latch hook is still tearing up my serving. No more !!!
-
- Posts: 4803
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Felt bob and polish for latch?
Anybody ever use crocus (sp) cloth. Its emery cloth but the grit is jewlers rouge.It'll make stuff shine like a new dime.I used to keep some on hand but dont have any right now. I'll look next time I am at a real paint store.
Re: Felt bob and polish for latch?
I'm not familiar with the product you mentioned, but, will definitely be on the look out the next time I'm out at the better stocked hardware/paint stores.
Thanks for the heads up ... it's good to learn about new products.
All the best,
John
Thanks for the heads up ... it's good to learn about new products.
All the best,
John
Re: Felt bob and polish for latch?
I believe crocus cloth will run about 600-800 grit. Pretty fine, but;flightattendant100 wrote:Anybody ever use crocus (sp) cloth. Its emery cloth but the grit is jewlers rouge.It'll make stuff shine like a new dime.I used to keep some on hand but dont have any right now. I'll look next time I am at a real paint store.
For comparison, Boo's website polishes from 1000 and ends at 9000 grit.
Tink
Re: Felt bob and polish for latch?
sombody asked about taking the trigger unit out..
you dont have too ..but if you take it out and put it in a soft jawed vise..
you can hang it in there upside down and realy see whats going on as you polish those latches..like Tink said you cant realy over polish...make em shine
you dont have too ..but if you take it out and put it in a soft jawed vise..
you can hang it in there upside down and realy see whats going on as you polish those latches..like Tink said you cant realy over polish...make em shine
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Re: Felt bob and polish for latch?
Call me stupid, but...strum wrote:sombody asked about taking the trigger unit out..
you dont have too ..but if you take it out and put it in a soft jawed vise..
you can hang it in there upside down and realy see whats going on as you polish those latches..like Tink said you cant realy over polish...make em shine
If I was going to do the job, I would do it [IMHO] correctly. [Keeping in mind, of course that you reportedly invalidate the warranty when you cut the seal strip on the trigger housing]
Polishing the hooks/latch is good for the string serving, but it ain't a "trigger job"! Polishing my hooks/latch was duck soup with the part in my hands -I cannot imagine doing as good of a job so easily by tinkering [no pun!] over the assembled crossbow.
As I see it, with a polished latch you have about 1/3 of a "tune-up" -and the string will love you for it.
But realize there is the other 2/3's remaining; -If you are not familiar with doing a trigger polish and cannot find the proper instructions, again, I would arrange for BOO to do the job. Don't tackle it yourself unless you understand how to do it correctly!
No, I'm not drumming up business for Boo just handing out some sage advice...
Here is a peek at what lurks inside of the housing:
If you are going after the latch "blind" it'll give you an idea what you are trying to accomplish...
With a complete trigger polish done correctly, you will notice a Magnificent improvement with the first shot.
If done incorrectly.. it could become a very DANGEROUS situation
Understand what you are doing before you decide to go into the trigger housing though If you decide to go ahead, open it in a closed room and into a towel to catch anything that drops or jumps out!
Enjoy
Re: Felt bob and polish for latch?
Good to hear.
My polishing cloths are tracking to arrive early next week. I believe what you and I purchased is the same product from 3M just packaged in different ways.
I can't wait to polish the latches and see how long my serving will now last. Hopefully, no more "cuts" from the right latch. If there is, I'm breaking out the electrical tools.
My polishing cloths are tracking to arrive early next week. I believe what you and I purchased is the same product from 3M just packaged in different ways.
I can't wait to polish the latches and see how long my serving will now last. Hopefully, no more "cuts" from the right latch. If there is, I'm breaking out the electrical tools.
-
- Posts: 987
- Joined: Fri Mar 01, 2013 9:02 am
- Location: 35 mins North of Lake Erie and 35 mins East of Lake Huron
Re: Felt bob and polish for latch?
How about a picture of one of your latch polishing jobs - finished product, please. I'm just wondering how much of it your polishing?? Just the face (whole front) or the whole latch.