Finally shot 355 with Broadheads
Moderator: Excalibur Marketing Dude
Finally shot 355 with Broadheads
Shot my 355 this afternoon using Diablo Bolts and Excalibur Boltcutters. Just as advertised they flew to the same point of impact as my 150gr. field tips.At 40 yards the Boltcutters were 1inch lower than the fieldtips.I Had some Monteac G-5 125gr broadheads that I Also tried and they also hit the same place as the Boltcutters.Accuracy wise these 2 Broadheads are interchangable in my Crossbow.Anyone have a preferance between these 2 Broadheads for Deer Hunting,it is it a coin toss?
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Finally shot 355 with Broadheads
I have used both in the past. They are very good no pick jus flip a coin
Re: Finally shot 355 with Broadheads
Thanks for the reply. I was surprised that the G5 and the Boltcutters shot in the same place,since there is a 25 grain Weight differance and the G5 having a slightly larger cutting diameter.
- nchunterkw
- Posts: 2904
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: Finally shot 355 with Broadheads
I shot through a bison rib with a Montec CS and it came out pristine. I think the POI "differences" are related to ballistics coefficient, bow efficiency, and drag. That's why you have to shoot any BH you hunt with IMO. Just curious.....what's you POI difference at 40 between 125 and 150 gr FPs?
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Re: Finally shot 355 with Broadheads
I have only shot the 150 gr. fieldpionts.