Help Mounting Bumper

[Solid19xX]

Finally decided to put the Matrix Suppression Sys. on my M330, but it rocks back n forward between (Riser n String). Something i'm missing here?

[xcaliber]

Since you have a 355 i assume you know what you're doing with the hardware. Please post a few pictures, this might help evaluate the real problem and avoid a bunch of assumptions!

[onebigskittle]

Did you tighten up the set screws on the flat part of the spindle? look at one and find the flat spot, line it up in the hole on the back of the riser and screw it down.

[Solid19xX]

You see how it sits on the string when position vertically? Aint it suppose stay mounted on the Riser?

My M355 didn't come with Reds and its not getting any Mods...

[IRON11]

The set I bought from Danny Miller sit flat against the riser on my Matrix 355 hope this helps

I

[Normous]

Looks like you need a pair of set screws to fasten the bumpers rods from under the riser. Does Danny not include them?

[Boo]

Looks like you need a pair of set screws to fasten the bumpers rods from under the riser. Does Danny not include them?

Yep, they come in a small bag that is stapled shut. As a temporary measure you can use the screws that hold the quiver bracket on to the rail.

[Normous]

Solid may have accidently missed them and worse, tossed them

[xcaliber]

Yepper! I think that's it.

[bobcattrapper]

Its also possible with the info you gave so far that your set screw holes are too long making the screws barely touch and hold the reds on.In any case when you get it sorted out be sure and put a drop of blue loc tite on em and leave em over nite like that.I tried it without and after a few shots they wobble out.

[yooper_man]

You see how it sits on the string when position vertically? Aint it suppose stay mounted on the Riser?

My M355 didn't come with Reds and its not getting any Mods...

Mine are Danny Miller rubber baby buggy bumpers. They come with a pair of stainless steel set screws.

Andrew

[bobcattrapper]

The man has not come back on here yet. Logic would say if he did not use the set screws they would just fall out lol So I'm giving him the benefit of the doubt here he used em but something else must be wrong

[Solid19xX]

This site have been acting up lately, finally able to log on...
Well i discover the Bumper are hold in place by 2 key bits underneath the riser. It was shipped in a separate bag along the with the Bumpers, something over look when receiving a Whole Matrix Package.
Thank you all for all the help.
As it sits now for its next Modification:

[bobcattrapper]

Yea this site been acting strange lately.Glad you made it back and you got it all figured out! Let us know how it shoots!

[Normous]

As it sits now for its next Modification:

What is the next mod?