scope

hankenhunter · Post by **hankenhunter** » Tue Jul 15, 2014 10:04 pm

If you have newer strings, then it is probably string creep. Check to see if your brace height has changed. If it has changed the add a few twists to the string instead of resighting. Hoping its a simple fix. If not then you've asked your question at the right place. Happy sightin,

Hank
P.s: Make sure the twists are in the same direction as the twists on the string.

Starvin' Hillbilly · Post by **Starvin' Hillbilly** » Tue Jul 15, 2014 10:26 pm

Riflemanz wrote:I had to loctite the 4 screws on the scope base because mine was loose after shooting.Check every screw.

X2! been there, and Blue 242 loctite

yooper_man · Post by **yooper_man** » Wed Jul 16, 2014 2:10 pm

I also recommend Leupold scopes.

Andrew

W.Miguire · Post by **W.Miguire** » Wed Jul 16, 2014 4:30 pm

yah hay theer, thanks, i'am going to send the tact scope back for warranty and give it a chance . I like the scope so I'll give it a chance . drove our model A's from Washington Island to Marquette in 2012 was a nice trip. nice little town . not to far from us but have to drive all the way around the lake .

yooper_man · Post by **yooper_man** » Thu Jul 17, 2014 3:08 am

W.Miguire wrote:yah hay theer, thanks, i'am going to send the tact scope back for warranty and give it a chance . I like the scope so I'll give it a chance . drove our model A's from Washington Island to Marquette in 2012 was a nice trip. nice little town . not to far from us but have to drive all the way around the lake .

I looked it up, and that is quite a trip around the lake. I really love upper Michigan (Say Yah To Da UP eh).

Give Danny Miller a call about your Tact-Zone scope @ (740) 483-2312. He is in Ohio and is a USA Excalibur warranty representative and an awesome man to speak too.

Andrew

Ronbo · Post by **Ronbo** » Mon Jul 21, 2014 12:44 pm

I was having a problem with my scope also but when I was ready to give up on it, I have been able to drive tacks with it on my last three target sessions. I am using the very same arrows, shooting off a bench, nothing has changed except the scope is holding zero.

W.Miguire · Post by **W.Miguire** » Mon Jul 21, 2014 4:23 pm

sad day for me . sent my tact zone back for a new one ,can't use my bow until it comes back. if that one moves I will be calling Danny Miller for a new lieupold his price is the most reasonable I found. will see what happens.

robertyb · Post by **robertyb** » Mon Jul 21, 2014 4:37 pm

W.Miguire wrote:sad day for me . sent my tact zone back for a new one ,can't use my bow until it comes back. if that one moves I will be calling Danny Miller for a new lieupold his price is the most reasonable I found. will see what happens.

Danny will take your Tact Zone and a few $$$ and send you a Leupold if you ask him too. I traded my Tact Zone for a Leupold Crossbone scope with Danny and am glad I did.

W.Miguire · Post by **W.Miguire** » Mon Jul 21, 2014 9:55 pm

thanks robertyb talked to Dan today did not know he would consider a trade. will keep it in mind if the new one don't work out.

thanks again.

JPjunkie · Post by **JPjunkie** » Mon Jul 21, 2014 10:07 pm

W.Miguire wrote:thanks robertyb talked to Dan today did not know he would consider a trade. will keep it in mind if the new one don't work out. thanks again.

Danny is an Excalibur Dictionary and the nicest guy Ive never met

Excalibur Crossbow Forum

scope

Re: scope

Re: scope

Re: scope

Re: scope

Re: scope

Re: scope

Re: scope

Re: scope

Re: scope

Re: scope