My new M310

BrotherRon · Post by **BrotherRon** » Wed Sep 17, 2014 1:01 pm

What do I need to use locktite on, and what shouldn't I use it on?
Remember - I'm a noob

Normous · Post by **Normous** » Wed Sep 17, 2014 1:03 pm

The 4 scope mount screws if you wish.

BrotherRon · Post by **BrotherRon** » Wed Sep 17, 2014 1:29 pm

Thanks

Normous · Post by **Normous** » Wed Sep 17, 2014 1:37 pm

Just a little and make it Blue.
Hint: degrease the taps and threads from machining oils. The oils contribute to part creep when exposed to vibration.

wolv1001 · Post by **wolv1001** » Wed Sep 17, 2014 2:24 pm

Sweet! A 310 owner,just coming off shoulder surgery and may go that route myself.Let us know how she drops from say 20 to 30 yards.

awshucks · Post by **awshucks** » Wed Sep 17, 2014 6:31 pm

Do yourself a favor, take the rail off the stock, look at the two screws on the bottom [thru the holes] and loc-tite them.

Loc-tite the screws holding the stirrup on also.

Congrat, glad to hear you got it!

BrotherRon · Post by **BrotherRon** » Wed Sep 17, 2014 11:53 pm

Actually, I won't have it until Friday.
Dan Miller has been swamped and was unable to ship it Monday like he thought....
So he upgraded the scope free of charge for shipping later than he planned.
I will also be receiving 10 Executioners in the package.
According to UPS tracking it will be here Friday

Now that I know it is on it's way I feel like a kid waiting to open Christmas presents. lol
Ron

flightattendant100 · Post by **flightattendant100** » Thu Sep 18, 2014 6:39 am

BrotherRon wrote:Actually, I won't have it until Friday.
Dan Miller has been swamped and was unable to ship it Monday like he thought....
So he upgraded the scope free of charge for shipping later than he planned.
I will also be receiving 10 arras instead of 6.
According to UPS tracking it will be here Friday

Now that I know it is on it's way I feel like a kid waiting to open Christmas presents. lol
Ron

Friday, you need to take off work and wait on the curb for the UPS driver!

I bet you are not disappointed. Have fun

Kegbelly · Post by **Kegbelly** » Thu Sep 18, 2014 6:51 am

Friday, you need to take off work and wait on the curb for the UPS driver! I bet you are not disappointed. Have fun

And wear a robe

fredd · Post by **fredd** » Thu Sep 18, 2014 6:55 am

Had to lock tite the 2 bolts that fasten the riser to the rail.

JPjunkie · Post by **JPjunkie** » Thu Sep 18, 2014 6:56 am

Kegbelly wrote:
Friday, you need to take off work and wait on the curb for the UPS driver! I bet you are not disappointed. Have fun
And wear a robe

And sit on a 5 gallon bucket

strum · Post by **strum** » Thu Sep 18, 2014 8:52 am

Here's a visual for your viewing pleasure

[URL=http://s790.photobucket.com/user/strum1 ... 1.jpg.html]

.

strum · Post by **strum** » Thu Sep 18, 2014 8:53 am

Preparing to get sighted in.

[URL=http://s790.photobucket.com/user/strum1 ... 3.jpg.html]

nchunterkw · Post by **nchunterkw** » Thu Sep 18, 2014 9:02 am

strum wrote:Here's a visual for your viewing pleasure

[URL=http://s790.photobucket.com/user/strum1 ... 1.jpg.html].

There should be a puppy in there somewhere...

bubba · Post by **bubba** » Thu Sep 18, 2014 10:21 am

Now that's funny!! There some real nuts on this forum,makes me feel right at home!! And I too used silicone clear. such small bolts scared they would be to hard to remove... bubba.....

Excalibur Crossbow Forum

My new M310

My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310

Re: My new M310