Excalibur Micro 335 Nightmare
Moderator: Excalibur Marketing Dude
- Canuck Archer
- Posts: 69
- Joined: Sat Dec 27, 2014 5:59 pm
- Location: Round lake Centre Ontario
Re: Excalibur Micro 335 Nightmare
Gus,
The thing that impresses me most about the Micro is the serving wear. Maybe I got lucky but mine has about a hundred and fifty shots and the string looks brand new.
Decent speed and shoulders soooo nice for a short bow, but I'm preaching to the choir with you coming from all your short, fast crossbow combos.
The trigger is more than adequate for hunting IMO.
I can't really find fault with anything about it.
The thing that impresses me most about the Micro is the serving wear. Maybe I got lucky but mine has about a hundred and fifty shots and the string looks brand new.
Decent speed and shoulders soooo nice for a short bow, but I'm preaching to the choir with you coming from all your short, fast crossbow combos.
The trigger is more than adequate for hunting IMO.
I can't really find fault with anything about it.
If dogs don't go to heaven, I want to go where they go....
- Starvin' Hillbilly
- Posts: 790
- Joined: Wed Mar 26, 2014 10:34 am
- Location: Arkansas
Re: Excalibur Micro 335 Nightmare
"He who dies w/ the most toy's wins!"
-Kenton Treat
RIP My friend,
-ken
-Kenton Treat
RIP My friend,
-ken
You see, in this world there's two kinds of people, my friend: Those with loaded guns and those who dig. You dig.-Blondie,
The good, the bad, the ugly
The good, the bad, the ugly
Re: Excalibur Micro 335 Nightmare
You won't be disappointed!
It’s not the way you rock, it’s the way that you roll!
- GrassyKnoll
- Posts: 1421
- Joined: Sun Dec 12, 2010 9:13 am
- Location: Jackson, NJ
Re: Excalibur Micro 335 Nightmare
Agreed with the serving wear. Almost none in over 200 shots.
Matrix 380 Xtra with Vortex Viper XBR, Trigger Tech,
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Re: Excalibur Micro 335 Nightmare
You need to get 2 one for you and one for your better half. Besides you sold off a quite a few bows as of late so now you have room for more.
Mag Air
Sig Sauer Romeo 5
Excalibur Quills
Tooth of the Arrow broadheads
Vixenmaster strings
Sig Sauer Romeo 5
Excalibur Quills
Tooth of the Arrow broadheads
Vixenmaster strings
- way123hockey
- Posts: 475
- Joined: Wed Aug 06, 2014 1:46 pm
- Location: Simcoe County, Ontario
Re: Excalibur Micro 335 Nightmare
Love my Micro RTX Gus but that Nightmare looks so sweet. You won't be disappointed.
Matrix 355 Blackout
Katana 385 BlackOps
Custom Black Vixen
Vixenmaster Strings
Munch Mounts
Wabi Calls
Katana 385 BlackOps
Custom Black Vixen
Vixenmaster Strings
Munch Mounts
Wabi Calls
- nchunterkw
- Posts: 2906
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: Excalibur Micro 335 Nightmare
Love my Nightmare but had to ditch the red string. The serving separated after 1 shot. Upside was it was easy to see with that red material. I need to reserve it and get it to a good home
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Re: Excalibur Micro 335 Nightmare
A Nightmare might make a decent "Oh Poor Me" present. Go for it!
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
- bikerbob24
- Posts: 149
- Joined: Tue Feb 18, 2014 6:58 pm
- Location: missouri
Re: Excalibur Micro 335 Nightmare
absolutely love my evil twins...can't see ever buying anything else....
Micro 335
Nightmare 335
Matrix 330
Axiom
Vixenmaster Flemish Strings
K-9 handler and trainer , K-9 Baily my partner for 7 years, we are now retired , spending our time hunting & fishing or just enjoying life.
Nightmare 335
Matrix 330
Axiom
Vixenmaster Flemish Strings
K-9 handler and trainer , K-9 Baily my partner for 7 years, we are now retired , spending our time hunting & fishing or just enjoying life.
Re: Excalibur Micro 335 Nightmare
Go for it!! You will love it!
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
- GrassyKnoll
- Posts: 1421
- Joined: Sun Dec 12, 2010 9:13 am
- Location: Jackson, NJ
Re: Excalibur Micro 335 Nightmare
I'm using Danny Miller Flemish strings on both mine and my daughter's Nightmares..
Swamp, got to be honest, there is almost no serving wear from these little bows, which is a great thing... GO FOR IT!!!!!!
Arrows are GT Laser Pro II"s with 110 grain brass and 100 grain Slick Trick standards and 2" Blazers fletched with the Bolt jig and Lumenoks.
PS: the trigger is not that bad either, it's not a TT but near as sloppy as the one that was on my 405..
And sorry to repeat the pics but i'm proud of my Nightmare.
Swamp, got to be honest, there is almost no serving wear from these little bows, which is a great thing... GO FOR IT!!!!!!
Arrows are GT Laser Pro II"s with 110 grain brass and 100 grain Slick Trick standards and 2" Blazers fletched with the Bolt jig and Lumenoks.
PS: the trigger is not that bad either, it's not a TT but near as sloppy as the one that was on my 405..
And sorry to repeat the pics but i'm proud of my Nightmare.
Matrix 380 Xtra with Vortex Viper XBR, Trigger Tech,
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Re: Excalibur Micro 335 Nightmare
Gus let me know when you are ready to sell that Nightmare.... I knowed you havent got her yet but i can wait .
Im shooting 16 1/4" zombies 110 grn brass.....lights out to 40. going to chop some Tapps to 16" when mom is done down south keeping warm. I expect the same results.
I made some 15 1/8" 6 (187grn total)with aluminum inserts and 6x92grn brass (254) for Wes. Ill keep ya'all posted on the results.
Also made Derrick 17" with aluminum inserts for his matrix and his newly acquired Micro.
Im shooting 16 1/4" zombies 110 grn brass.....lights out to 40. going to chop some Tapps to 16" when mom is done down south keeping warm. I expect the same results.
I made some 15 1/8" 6 (187grn total)with aluminum inserts and 6x92grn brass (254) for Wes. Ill keep ya'all posted on the results.
Also made Derrick 17" with aluminum inserts for his matrix and his newly acquired Micro.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: Excalibur Micro 335 Nightmare
16" will be inside for sure. 16 1/4 was with all my fixed. ST mags g5 strikers and grizztricks which is my longest fixed.Swamp Donky wrote:A man after my own heart... I'm digging out some "Splinters" from the SD boneyard, as we speak! Probly gonna be gunnin' for 16" inchers exclusively if they stay inside the stirrup with fixed heads...newbie wrote:Gus let me know when you are ready to sell that Nightmare.... I knowed you havent got her yet but i can wait .
Im shooting 16 1/4" zombies 110 grn brass.....lights out to 40. going to chop some Tapps to 16" when mom is done down south keeping warm. I expect the same results.
I made some 15 1/8" 6 (187grn total)with aluminum inserts and 6x92grn brass (254) for Wes. Ill keep ya'all posted on the results.
Also made Derrick 17" with aluminum inserts for his matrix and his newly acquired Micro.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
-
- Posts: 1823
- Joined: Mon Mar 17, 2008 11:20 am
- Location: ontario
Re: Excalibur Micro 335 Nightmare
you may as well get a micro and take her for a test ride you have tried every other model thy make.then you can give us a full report on the whole line of bow ,Dutch
addicted to canadian beaver
Re: Excalibur Micro 335 Nightmare
That will help!
It’s not the way you rock, it’s the way that you roll!