Loc- Tite

[Sloppy Does]

When you guys remove the limb bolts (4) Are you using loc-tite when you put them back on or not ? Im not sure sure I want bolts that I may not be able to remove later without a hacksaw.

[Kegbelly]

I use blue loc-tite on all fasteners, and let it cure 24 hrs. Won't vibrate loose but you can still take it apart later if you need to.

[bubba]

x2 on all bolts, just a little will do ya, and the set up time is the way to go..........

[otisbrazwell]

I'd buy better bolts mainly the small ones
As the allen heads will strip.

[Gwens Dilemma]

To loosen Loctite put an allen wrench in the head, warm up (not red hot) the allen wrench just above the bolt with a small torch and that will liquefy the Loctite and make the bolt grow. You may need to change allen wrenches after heating and before turning
Dave