"Torx Head" Screws

[Hawkeyemd]

Where can I find the above mentioned screws for the scope mount on my 355 7 380 ? I've looked on the net, but can't seem to find the proper size ! Any help would be greatly appreciated ! Thanks, Hawkeyemd

[Deerstalker]

Do a search on this forum for Torx screws and you will find several places suggested that you can get the screws. When you replace the front 2 screws be sure that the length of the screw does not interfere with the latches by binding them. When you get the front 2 screws off you can rock the scope rail up & back which will help to loosen the back 2 screws. Hope this helps.

[colouredchameleon]

Hard to narrow it down for you not knowing your location.
However
Got mine through a local : Fastenal
Got a box of 100X more than I need but will find a use over time .


https://www.fastenal.com/

[Hawkeyemd]

Hey, Thanks Guys 'N' Gals!! I found the "Torx Head" Screws @ our local Fastenal Store! Had to order them, they came in silver, but no problem! Thanks Again,for all your help! Hawkeyemd

[vixenmaster]

McMaster-Carr has them