Matrix 380/Tact Zone question

[dannyboy]

Finally got to do some shooting at 60 yards today and with my Matrix 380 and dialed in the Tact Zone scope.
Using Zombie Slayers crafted by Big John - they easily group under 2" at that range. (thanks John!) With a 100 grain field point the bolts weigh 392 grains.
The setting on the Tact Zone scope read 375fps when zeroed, this seems high and I realize the scope ring numbers may be off.
My Chrony is broke but I wondered if other shooters experienced something similar? or how close the Tact Zone settings are to actual velocity.

Thanks again,
Dan

[MprBlackout]

My blackout with diablos and tips from lt stuff pac is set bout that
with same type groups at 60. I say same type because wont shoot same
dot.
am lookin for sweet deal on some zombies

[vixenmaster]

Thats common usin the Taczone,its a general fps area

[JPjunkie]

Mine was dialed in at 373

[DaveShooter]

Mine was also close to that using 20" Easton alum mag 2219's with a 100 gr field point.I could only shoot up to 50 yds on the range I was on. I won't even shoot that far in the woods. Most shoots will be 20 to 30 yds for this here boy !!!!

[dannyboy]

Thanks for the info, going to have to send the Chrony in for repair to see how fast this 380 is.
I am amazed how accurate it is, I am sure that with a solid rest and no wind it would keep under 1" at 60 yards.

Thanks,
Dan