Which loc-tite???

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
lswoody
Posts: 154
Joined: Sat Feb 11, 2012 6:34 pm

Which loc-tite???

Post by lswoody »

Which one do I need to get?
Proverbs 3:5-6
User avatar
Kegbelly
Posts: 1639
Joined: Mon Sep 23, 2013 8:04 pm

Re: Which loc-tite???

Post by Kegbelly »

Most folks here go with blue loctite. It holds strong but you can still disassemble later if necessary. Be sure to let it cure 24 hours before you shoot.
Matrix 380
18" Zombies, 400 gr w/ 125 gr Magnus Stingers & Lumenoks
Exomag
20" Zombies, 380 gr w/ 100 gr Magnus Stingers
paulaboutform
Posts: 4970
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia

Re: Which loc-tite???

Post by paulaboutform »

I agree with Kegbelly, just make sure it says medium strength. I've seen some blue loktight that was permanent.
You're only paranoid if everyone isn't out to get you.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
User avatar
Boo
Posts: 14364
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: Which loc-tite???

Post by Boo »

I use a green Loctite product which is a medium strength post assembly/penetrating grade.
Some people just like stepping on rakes
xcaliber
Posts: 12836
Joined: Fri Jan 11, 2013 7:35 pm
Location: NW Indiana

Re: Which loc-tite???

Post by xcaliber »

Blue, 242. That is the stuff.
It’s not the way you rock, it’s the way that you roll!
lswoody
Posts: 154
Joined: Sat Feb 11, 2012 6:34 pm

Re: Which loc-tite???

Post by lswoody »

Thanks guys!!!!
Proverbs 3:5-6
awshucks
Posts: 5238
Joined: Thu Jan 19, 2006 6:40 am
Location: arkansas

Re: Which loc-tite???

Post by awshucks »

Boo wrote:I use a green Loctite product which is a medium strength post assembly/penetrating grade.
Mixing blue and yellow? :mrgreen: :mrgreen: :mrgreen:
"Eze 18:21"
User avatar
galamb
Posts: 554
Joined: Mon Nov 14, 2011 8:09 pm
Location: Inverary, Ontario

Re: Which loc-tite???

Post by galamb »

You have to use blue.

The "red" stuff is for those commie Chinese built bows :lol:
Graham

Micro 340TD, 17" Gold Tip Ballistics (180 gr inserts) - 125 gr Iron Will/VPA/TOTA (504 grains total/21.6% FOC) @ 301 FPS
jparchery
Posts: 208
Joined: Tue Sep 11, 2012 9:58 pm
Location: Mississauga,Ontario

Re: Which loc-tite???

Post by jparchery »

Loctite green retaining compound, very small amount and let it dry for at least 1 day before you shoot the bow, I never had any problems with it
DaveShooter
Posts: 1360
Joined: Thu Aug 17, 2006 9:45 pm
Location: Ohio

Re: Which loc-tite???

Post by DaveShooter »

galamb wrote:You have to use blue.

The "red" stuff is for those commie Chinese built bows :lol:
Loved this so very much- :lol: :lol: :lol:
Post Reply