Matrix 355 & a Varizone Scope

vixenmaster · Post by **vixenmaster** » Sun Apr 12, 2015 6:57 pm

I put it on Marie Laveau so i can be gettin ready fer the Mo. Gatherin. I got it shootin 3/4" high at 20 yds jus in case a varmit is a few yds past my est. I had speed ring all maxed out. Shot it at 30 yds n it were almost an inch high. 40 yds was 1 1/4" high, 50 yds was jus shy of 2" high. Its usable but not ideal, fer deer n hogs n such. If'en you nit picky it maynot be yer cup of coffee.

Masboy · Post by **Masboy** » Sun Apr 12, 2015 7:45 pm

Good to know Mike! I was wondering how they would do on the faster bows.

fuzzy · Post by **fuzzy** » Sun Apr 12, 2015 7:56 pm

bubba · Post by **bubba** » Sun Apr 12, 2015 8:10 pm

What string and what weight arrow you shooting on your 355 ? Are you still getting 361 f.p.s.? just curious..........

Riflemanz · Post by **Riflemanz** » Sun Apr 12, 2015 8:14 pm

I'll have to site mine in with the Varizone and my 20" 432gr arrows and see how it shoots.

Masboy · Post by **Masboy** » Sun Apr 12, 2015 8:19 pm

Good thinking Fuzzy! if you can,t match your scope to your arrows , match your arrows to your scope. I will just add a slug that weighs the right amount to get my my arrows to hit with the icons. No brain here

vixenmaster · Post by **vixenmaster** » Sun Apr 12, 2015 9:14 pm

18" BEE's wid 92gr brass front insert. .001 shaft straightness, 100gr bullet pts by PDS. 2" logoed Blazer vanes, total arrow weight is 385gr. String is a flemish reject i made D97 matial halo .030 center servin. No on 361 fps, more like 352

awshucks · Post by **awshucks** » Mon Apr 13, 2015 1:09 am

Did you try dropping down the 3/4" high at 20 and see where your farther arrows are hitting?

Seems to me it would be close to spot on.

fergie · Post by **fergie** » Mon Apr 13, 2015 1:51 am

I bet if you swapped out that 100 grain tip for one in 125 grains you'd be right where you wanna be.

flightattendant100 · Post by **flightattendant100** » Mon Apr 13, 2015 6:00 am

awshucks wrote:Did you try dropping down the 3/4" high at 20 and see where your farther arrows are hitting?

Seems to me it would be close to spot on.

What he say!

vixenmaster · Post by **vixenmaster** » Mon Apr 13, 2015 6:40 am

awshucks wrote:Did you try dropping down the 3/4" high at 20 and see where your farther arrows are hitting?

Seems to me it would be close to spot on.

Naw that jus be more work i have to do

Sides that i wouldn't have nutten to post about

ehntr · Post by **ehntr** » Mon Apr 13, 2015 10:30 am

vixenmaster wrote:
awshucks wrote:Did you try dropping down the 3/4" high at 20 and see where your farther arrows are hitting?

Seems to me it would be close to spot on.

Naw that jus be more work i have to do Sides that i wouldn't have nutten to post about

Mike. Take the turret cap off, rotate the turret 2 clicks down. Job finished. Take the rest of the day off

Report back tomorrow

Excalibur Crossbow Forum

Matrix 355 & a Varizone Scope

Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope

Re: Matrix 355 & a Varizone Scope