Debate on the C2 Crank versus the older one

amythntr · Post by **amythntr** » Sun Apr 26, 2015 6:46 pm

.... It fits perfectly on my 380... Go figure!

Anthony

robertyb · Post by **robertyb** » Sun Apr 26, 2015 8:21 pm

You got a defective stock on the Micro. Either have warranty service replace it or drill out the marks till the screw will seat.

amythntr · Post by **amythntr** » Sun Apr 26, 2015 10:13 pm

robertyb wrote:You got a defective stock on the Micro. Either have warranty service replace it or drill out the marks till the screw will seat.

....I will most likely widen the hole slightly to accommodate the C2...I want to check this out on both my friends Rick and Mike (MCS) who own the Micro's first...

Anthony

DaveShooter · Post by **DaveShooter** » Sun Apr 26, 2015 11:31 pm

Buddy the one u took pictures of looks like the C2 crank.

But I could be wrong- as won't be the 1-st or last that I was right or wrong....

luckymike · Post by **luckymike** » Mon Apr 27, 2015 5:42 am

looks to be a quality issue with the stock on the micro .when hole was being drilled the stock probably wasn't seated in fixture properly, being that the crank fits properly on your other xbow

amythntr · Post by **amythntr** » Mon Apr 27, 2015 10:35 am

....everyone, Peter offered to exchange the stock....Bada Bing said, "don't you dare!"...so I will just have a dentist file the hole out a little and it should be problem solved

!

Anthony

vixenmaster · Post by **vixenmaster** » Fri May 01, 2015 9:02 am

Well i jus got my Nitemare yesterday. I got out my C2 this mornin, at 1st i didn't hold me mouth right. I tried it the 2nd time after lookin closely. Its fits no problem n ckeek piece isn't anywhere in the way. The hole is a few thousands diff but it sure does work. I have put the Pirate string on Captain Morgan n lettin it stretch some

amythntr · Post by **amythntr** » Fri May 01, 2015 9:56 am

vixenmaster wrote:Well i jus got my Nitemare yesterday. I got out my C2 this mornin, at 1st i didn't hold me mouth right. I tried it the 2nd time after lookin closely. Its fits no problem n ckeek piece isn't anywhere in the way. The hole is a few thousands diff but it sure does work. I have put the Pirate string on Captain Morgan n lettin it stretch some

...Glad to C the C2 worked for you Matie....otherwise Capt Morgan would have had them there ex-exutives at Bowtech walkin the plank....arrrrrrh!

Anthony

DaveShooter · Post by **DaveShooter** » Sat May 02, 2015 11:10 pm

amythntr wrote:
vixenmaster wrote:Well i jus got my Nitemare yesterday. I got out my C2 this mornin, at 1st i didn't hold me mouth right. I tried it the 2nd time after lookin closely. Its fits no problem n ckeek piece isn't anywhere in the way. The hole is a few thousands diff but it sure does work. I have put the Pirate string on Captain Morgan n lettin it stretch some
...Glad to C the C2 worked for you Matie....otherwise Capt Morgan would have had them there ex-exutives at Bowtech walkin the plank....arrrrrrh!

Anthony

Lol that is a good one

Excalibur Crossbow Forum

Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one

Re: Debate on the C2 Crank versus the older one