Picked up another RELAYER needs some work on the trigger assembly the scope mount needs too be drilled out fer new mounting screws. Looking at the Xbow it looks as all one has to do, is knock out the metal pin and the assembly will come out Any one know if'n I am right I can e-mail Bill T. and ask, but thought I would ask on the forum first.
See img.
There is a screw through the trigger guard and the pin through the stock which must be removed to remove the trigger unit, but the pin is a pain to remove sometimes, and I'd just drill the four holes out to .156 and retap with 10-32 without removing the trigger unit if I was you........Bill