Stupid weak targets!

[frontsite]

What target can I buy that will consistently stop Excalibur 405 bolts before the vains hit and go in the target and get mangled up? I took my 405 out and lined it in for the first time this weekend and damaged several expensive arrows because the vanes are now all torn and/or mangled. I have a buck commander crossbow target and the arrow stops with about an inch of fletching sticking out.
Drop a product name and type or a link would be even better.
Thanks



"GEORGE IS GETTIN FRUSTRATED!!" -Seinfeld

[xcaliber]

18-1 Rinehart will stop them.

[Boo]

I'm quite happy with these two for broadheads
http://www.rinehart3d.com/products/#i64
http://www.rinehart3d.com/products/#i83

What you have to do is make 30 yards your shortest distance and lube the front inch or two of your arrows. Those two things will make life a tad easier. A Danny Miller arrow puller would be nice too.

[deertrx]

Bulldog Plus! Made in Canada. It stops my 380 no problem check it out online
The target weighs 35 lbs you can't knock over.
Good Luck!
deertrx

[one shot scott]

shooting 20 with that beast is gonna be tough on targets! a fresh rhinehart should stop it

When I first aquired my 380 I had a semi worn 18-1 and it blew right through the thing like she was made of swiss cheese. Thought I missed now fresh targets are for broadheads and semi worns are for field tips

[BrotherRon]

move out another 20 yards

[paulaboutform]

Firstly, welcome to the forum and congrats on your new 405. Secondly, it'll make it easier to help you if you finish filling out your profile so we know where you're at. As mentioned, whichever target you buy a must have is the Danny Miller plier pullers. Once you use them you'll wish you had them from the start. For targets there are a few that come to mind immediately. Third Hand Archery Rag Bag for field points, Spderweb Crossbow target for field points, Rhinoblock or 18 in 1 by Rinehart, the Blob. Good luck, any of these will work.

Paul

[amythntr]

I'm quite happy with these two for broadheads
http://www.rinehart3d.com/products/#i64
http://www.rinehart3d.com/products/#i83

What you have to do is make 30 yards your shortest distance and lube the front inch or two of your arrows. Those two things will make life a tad easier. A Danny Miller arrow puller would be nice too.

.....X2 all the way!

Anthony

[UPSMAN]

Rinehart Rhinoblock

[frontsite]

Okay okay, took care of the profile. So should be squared away on that. I have the Excalibur puller for the arrows they make. It works okay but sometimes you end up pilling the backs out of the arrow if your not careful.

[frontsite]

Bulldog Plus! Made in Canada. It stops my 380 no problem check it out online
The target weighs 35 lbs you can't knock over.
Good Luck!
deertrx

drop me a link to a site that I can buy the one your talking about trx. ty

[longbow joe]

A big old feed bag filled with blue jeans old underware watever will stop em good!

[wildcatter]

I'm quite happy with these two for broadheads
http://www.rinehart3d.com/products/#i64
http://www.rinehart3d.com/products/#i83

What you have to do is make 30 yards your shortest distance and lube the front inch or two of your arrows. Those two things will make life a tad easier. A Danny Miller arrow puller would be nice too.

What he said,,, I like the Brute cause it's bigger and gives me aiming spots.
http://www.rinehart3d.com/products/#i84

For field point only try the BigShot 450K
http://www.bigshottargets.com/products.php

[frontsite]

where do I get this Danny Miller arrow puller?

[Boo]

where do I get this Danny Miller arrow puller?

From Danny Miller