brace heaight on a 405

[ohiobuck]

I am a bit unsure on my brace height. All the excaliburs I have seen in the store have clearly visible lines for brace height. I have a very faint line on mine. It actually looks like it may just be the normal spot the string rests. I had to adjust the string today. the bumpers were being rested on. I gave about 4 twist to back it off about .25" It is just behind the mark I mentioned. Is there supposed to be a clearly etched line in the 405s?

[8ptbuk]

I recommend you set it 3/4" from the Riser/Rail joint , And also should keep the string at least 1/4" off the bumpers at all times .

[ohiobuck]

Thank you sir. I was a touch shy. I will give it another twist.